Eton FR1000 Button again to move to the next feature setting, Transmit TX Power Level Selection

FR1000 OWNER’S MANUAL

OPERATING YOUR RADIO continued

button again to move to the next feature setting.

Note: If you select any CTCSS Privacy Code, any pre-selected DCS Privacy Code will be cancelled and vice-versa. Selecting a Privacy Code of “oF” will disable the Privacy feature. To communicate be- tween two FR1000 Series radios, all radios in your group must be set to the same channel and Privacy Code selections.

TRANSMIT (TX) POWER LEVEL SELECTION

Your FR1000 Series has 2 power level settings. To select the power level on channels 1~7 and 15~22, press the MENU button until a “Pr” icon will appear on the display. Then turn the TUNING knob to select TRANSMIT POWER LEVEL icon (HI/LO). To confirm, press the PTT but- ton or press MENU button again to move to the next feature setting.

When the Battery Meter drops to 1 bar , the TX Power will automatically switch from HI to LO level.

Note: You cannot adjust the power setting on the FRS channels (8~14). They are set to Low power per FCC regulations.

VOX (Hands-free Transmission)

Your radio has 3 VOX level settings: (oF/1/2/3). To set VOX, press the MENU button until the display shows “Vo” while on the right, an “oF” icon appears. Select “1”, “2”, or “3” by turning the TUNING knob and push the PTT key, or press MENU button again to move to the next feature setting. VOX will be more sensitive on the “1” setting than on the “3” setting. To turn VOX off, press the MENU button until the display shows “Vo” while on the right, a “1”, “2” or “3” icon appears. Select “oF” by turning the TUNING knob and push the PTT key, or press MENU button again to move to the next feature setting.

17