FR1000 OWNER’S MANUAL
OPERATING YOUR RADIO continued
CALL ALERT
Your FR1000 Series can transmit a call alert for a fixed length of time. To send a call alert, press the CALL/LOCK button. The TX icon will appear while transmitting a call alert and a tone can be heard on the speaker for confirmation. The FR1000 has 5 call alert selections.
KEYPAD LOCK
To avoid accidentally changing the radio setting, press and hold the CALL/LOCK button for about 4 seconds. The KEY LOCK icon will appear on the display. The PTT, CALL, and MONITOR function will still be active. Repeat the same procedure to unlock the keypad.
DISPLAY ILLUMINATION
During Power on, the display illumination will activate for approx. 5 seconds. The display illumination can also be activated when the MENU, SCAN, and MONITOR button is pressed. It can also be activated if the TUNING knob is turned.
Note: In Clock Mode (Power Off) the display illumination can be activated by pressing the MENU, SCAN, and MONITOR button.
SETTING PRIVACY CODES
Your FR1000 Series has 121 Privacy Codes available. The selected Privacy Code may be different for each channel. To select a Privacy Code for the current channel press the MENU button once, and then turn the TUNING knob to select one of the 38 CTCSS Privacy Code. Press again the MENU button and turn the TUNING knob to select one of the 83 DCS Privacy Code. The Privacy Code icon on the display will indicate whether you set your Privacy Code in CTCSS or DCS mode. To confirm the selection, press the PTT button or press MENU
16
