HOW TO ASSEMBLE (Continued)
Step B Attach Handle
CAUTION: Do not catch cord under handle.
Tab
4
Ledge
Groove 3
Groove
3.From rear of cleaner, align handle with groove and slide onto cleaner. If necessary, use thumb and finger pressure to slide handle into position.
4.Once handle is in place, check that the hose adapter tab is completely secure under the ledge of the handle.
5.Attach handle with two 5/8 inch screws in the assembly packet. Use either a slotted or Phillips® head screwdriver.
Step D Store Electrical Cord
NOTE: For easier access to bag compartment, when you store the electrical cord use a figure 8 pattern.
4
Step C Store Hose and Accessories
Combination
Tool
Hook
Crevice
Tool
Carrying
Handle
Extension Wand or Wands
HEPA Filter (on some models)
Tabs
Hose
Retainer
Step E Check Cyclonic Cassette
Make sure that the cyclonic cassette is fully seated in the vacuum. Place thumbs on cyclonic cassette (marked by arrows above) and push firmly.
NOTE: Do not lift cleaner by cassette handle, use carrying handle on the back of cleaner.
