How to Clear Hose Clogs
Note: Turn off the switch and unplug the electrical cord before clearing hose.
1.Step on handle release.
2.Lower handle until cleaner is flat on the floor.
3.Turn the cleaner over so back side faces up.
4.Lift cleaner and rest it against a support or counter.
5.Pull upward on the attached wand portion of the hose assembly and remove from the hose retainer.
6.Check for clogs in the hose retainer and throughout the hose assembly.
7.Use a tool that will not puncture the hose. Clear any debris from the hose retainer or the hose assembly that could restrict the air movement.
8.Flexing the hose may help loosen the clog.
9.After the clog is removed make sure the hose assembly, and handle are reassembled onto the unit.
10.If the clog is hard to remove, check the brush roll area. Remove the hood and clear the hose inlet in the brush roll area.
Hose
Assembly
Attached
Wand
Hose
Retainer
HEPA Cartridge Filters
(Only for models with HEPA cartridge.)
Check the HEPA filters with each disposable dust bag change. Replace twice a year or after every six bag changes.
Latch
Filter Cartridge (One complete unit)
Tabs
To remove HEPA cartridge filters
1.Push down latch and pull filter cassette back.
2.Then lift filter up and remove.
To replace HEPA cartridge filters
1.Place bottom tabs of filter cassette into slots.
2.Rotate filter toward cleaner.
3.Push upward on the latch to secure into place.
NOTE: To have the benefit of a sealed HEPA system, you must use one of the HEPA cartridge filter systems.
Filters in Filter Frame
(Only for models with filter frame)
Check the filter each time dust cup is emptied or as needed. Replace twice a year as needed.
Filter Frame plus filter (depending on your vacuum model)
Filter Filter
Frame
To remove filters from filter frame.
1.Push down latch and pull filter frame back.
2.Then lift filter up and out of filter frame.
To replace filters into filter frame.
1.Place new filter in filter frame. Place bottom tabs of filter frame into slots.
2.Rotate filter frame toward cleaner.
3.Push upward on the latch to secure into place.
Use GENUINE EUREKA replacement filters, HEPA , part no. 61500; Micron, part no. 60801.
9
