![](/images/new-backgrounds/1063528/6352811x1.webp)
Step C Store Electrical Cord
6
Cord
Retainer
7
Cord
Hook
7
Cord
Hook
6.You will find your cord retainer on the handle above the upper cord hook. Firmly push the electrical cord down into the cord retainer before using the vacuum. This will place the cord out of the way while you are vacuuming. Remove cord from retainer when ready to store vacuum or when using hose and attachments.
7.Next wind the cord around the two cord hooks on the back of cleaner. The upper cord hook turns to release the cord. Turn the hook up to store the cord.
8.Secure the plug to the cord to prevent unwinding.
6
Step D Check Dust Cup
Remove and replace the dust cup to ensure it is properly lined up with the seals in the dust cup compartment. During shipment the dust cup may have moved affecting overall performance.
How to Remove the Cyclonic Dust Cup
Dust Cup | Tab |
| |
Lever |
|
Notch
Dust Cup
Platform
9.With handle in upright position, locate dust cup lever on the front of the cleaner. When facing the cleaner, slide the lever to the left to the release position. The dust cup platform will drop down.
10.Lift dust cup from the dust cup compartment.
How to Replace the Cyclonic Dust Cup
11.See the above illustration. When replacing dust cup tilt handle back slightly for easier installation. Locate the notch on the dust cup and the tab on the inside of the dust cup compartment. Line them up and slide the dust cup into place on the dust cup platform.
12.Check to be sure the filter tube and dust cup are properly lined up with the seals at the top of the dust cup compartment for maximum performance.
13.Slide the dust cup lever to the right to the engage position to secure the filter tube and dust cup.