Eureka 5739, 5829, 5700, 5800 DustBag, Removing the Dust Bag Style LS, Installing New Dust Bag

Models: 5800 5700 5829 5739

1 20
Download 20 pages 45.26 Kb
Page 10
Image 10

The instructions in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the dust bag, filters, belt, and brush roll often.

ROUTINE

NOTE:

When vacuuming carpet fresheners or cleaners, powder, plaster dust, or similar fine substances,

 

the dust bag and filters will require more frequent maintenance.

NOTE:

Turn off the switch and unplug the electrical cord before routine maintenance. Never operate the

 

vacuum cleaner without the dust bag or filter assembly in place.

MAINTENANCE

DustBag

Removing the Dust Bag (Style LS):

1Remove dust bag cover by lifting up on latch and pivoting dust bag cover out and away from cleaner.

Latch

2Grasp dust bag flaps and pull out from cleaner.

Flaps

Installing New Dust Bag:

BEND FLAPS FORWARD

 

PLACE BAG FLANGE

 

 

ON TOP OF SHELF

 

 

 

 

 

 

PUSH BAG INTO HOUSING

POSITION BAG BOTTOM BEHIND RIBS

Reinstalling the Dust Bag Cover:

Place the bottom of the dust bag cover on cleaner lining up grooves on outer edge of cover with rails on side of cleaner. Rotate cover up, pressing against cleaner until it locks into place.

Rails on

Cleaner

Grooves on

inside edge of bag cover

10

Page 10
Image 10
Eureka 5739, 5829, 5700 DustBag, Removing the Dust Bag Style LS, Installing New Dust Bag, Reinstalling the Dust Bag Cover