CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts, make sure on/off switch is in off (0) position before plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Attach Handle
CAUTION: Do not catch cord under handle.
1
Groove 1
Groove
2
1From rear of cleaner, align handle with groove and slide onto cleaner. If necessary, use thumb and finger pressure to slide handle into position.
2Attach handle with the two screws provided in the assembly packet. Use a Phillips® head screwdriver.
NOTE: Hand tighten with screwdriver to be sure both screws are firmly seated.
Attach Hose
3
Upper
Hose
Retainer
4 | HOW | |
| ||
Hose | TO | |
Lower | ||
ASSEMBLE | ||
Hose | ||
| ||
Retainer |
|
3Pick up hose and lay across upper hose retainer.
4Push the end of the hose in the lower hose retainer to secure.
7
