ON/OFF Switch. International symbol I means On, International symbol O means Off.
Cleaner Height Setting. An adjustment that raises or lowers the cleaner base to match the type of floor surface.With the cleaner cord unplugged, set the adjustment to lowest setting for maximum carpet cleaning. If the cleaner is difficult to push, move adjustment to next highest setting until cleaner is comfortable to push.
The brush roll must reach the carpet for effective cleaning. For ease in moving the adjustment knob, place handle in operating position and tilt cleaner back to remove weight from front wheels.
Handle Release. Step on | Store | ||
handle release to pull |
| ||
handle | back to | a |
|
comfortable operating |
| ||
position. To lower |
| ||
handle completely to |
| ||
the floor, depress |
| ||
handle | release | a |
|
second time.
Operate
Clean
Under
Helpful Information:
Before cleaning under low furniture, check area first for objects that might harm the unit or block the vacuum hose.
NOTE: While using accessories, do not place cleaner on furniture or steps as the brush roll may cause damage. Place cleaner on floor with the handle in storage position.
| Dusting/ |
Crevice | Upholstery |
Brush | |
Wand |
|
1.To use accessories remove hose from rear of cleaner by lifting up and twisting.
2.Place desired accessory onto end of hose or wand.
Hose
or
Wand
Dusting/Upholstery Brush is for furniture, blinds, books, lamp shades, shelves, curtains, draperies, cushions and fabrics.
Crevice Wand cleans corners, stairs, baseboards, and between cushions.
Nested extension wands to add reach.
• Grasp both wands near ridges.
• Pull apart. | HOW | ||
TOUSE | |||
• Turn ridge end to center. | • Push wands together. | ||
9
