How to Replace Worn Belt or Light Bulb (On Some Models)
Note: Disconnect power cord and wands from electrical hose before replacing belt or bulb. Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive belt.
4. Return brush roll into base.
1.Remove two screws from bottom side. Turn over to grasp hood near handle socket and lift forward.
Replace headlight bulb, if necessary. Use GENUINE EUREKA replacement bulb (refer to customer order form).
Continue to step 2 to change belt. Skip to step 7 and 8 to replace hood on motorized nozzle.
2.Remove two screws located in front of the light bulb and lift up to remove the brush roll cover.
Motor Pulley
{
3. Lift out brush roll; replace new belt around brush roll pulley.
{ | Brush | |
Roll | ||
| ||
| Pulley |
5.Rotate belt onto motor pulley.
6.Replace brush roll cover.
Ridge
7.Tilt cover over ridge and push down.
8.Secure with screws on underside (refer to 1).
Look for the | symbol. |
Use GENUINE EUREKA replacement belt, 58065.
14
