Euro-Pro 1100 manual Using the Ninja Pro System, Before First Use, How To Assemble, How To Use

Using the Ninja™ Pro System 1100

English

Shaft

Fig. 3a

Shaft	Locking
	Handle

Fig. 1 Fig. 2

BEFORE FIRST USE

1Remove all packaging material and labels from the appliance.

2Wash the lids, pitcher, bowl and attachments in warm, soapy water with a soft cloth. Use caution when washing the blade assemblies as the blades are very sharp.

3Rinse and dry thoroughly.

4The pitcher, bowl, lids and attachments are all dishwasher safe. It is recommended that the lids and attachments go on the top rack. Ensure that the attachments are removed from the containers before placing in the dishwasher.

5The motor base can be wiped clean with a damp cloth.

Fig. 3b

HOW TO ASSEMBLE

CAUTION: Make sure that the motor base is unplugged from the power source.

1Place the motor base on a clean, dry, level surface.

2Lower the pitcher or the bowl onto the motor base. (Fig. 1)

3Rotate the container to the left as far as it will go. As the container rotates, it will lower and the safety tabs on the bottom of the container will slide under the safety tabs on the top of the motor base. (Fig. 2)

4The pitcher or bowl can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner. (Fig. 3a, Fig. 3b)

5Place either the 6-Blade assembly or the whipping attachment into the pitcher.

(Fig. 4a) Place either the 4-Blade assembly, dough blade or dough paddle into the bowl. (Fig. 4b) Holding the attachment by the shaft, place it onto the gear shaft inside the container. Ensure that the attachment fits snuggly around the gear shaft and that it is standing straight.

Fig. 4a Fig. 4b

CAUTION: Blades are sharp! Use extreme caution when handling the blade assemblies. Always hold them by the shaft.

HOW TO USE

IMPORTANT: DO NOT attempt to operate the appliance without the lid on.

1Place the pitcher or bowl onto the motor base and insert the desired attachment. (See 'HOW TO ASSEMBLE'.)

2Add the ingredients to the container. Make sure your total of ingredients don't go higher than the highest measured marking line on the side of the containers.

IMPORTANT: Never add ingredients into the container before placing the attachment in first.

Fig. 5

3Place the corresponding lid onto the container with the locking handle in the upright position and the pouring spout on the corner opposite the container’s

handle. Align the arrows () located on the lid and container’s handle. Ensure that the lid is completely seated and press the lid down into the container. Press the locking handle down so that the latches on the lid fit under the tabs on the container. (Fig. 5)

NOTE: If you need to add additional ingredients while the appliance is processing, open the pouring spout cap and pour the ingredients in through the opening.

4Plug the power cord into the electrical outlet and press on the power button ().

NOTE: As a safety feature, the power button () will flash and the motor will not work if the container and lid are not installed correctly. When the container and lid are installed properly, the power button () will be solid, indicating that the appliance is ready for use.

5Select the button that best suites your needs.

* See ‘Speed Settings & Uses’ chart.

8 TOLL FREE: 1-800-798-7398

NJ602W_30_IB_ENG_100426.indd 8-9

www.ninjakitchen.com 9

10-05-03 11:38 AM