Using the Ninja™ Pro System 1100 - cont'd
Fig. 6 | Fig. 7 |
English
Using the Pitcher
Fig. 8 | Fig. 9 |
6Press power button (
) or the selected button a second time to stop the attachment from turning or press a different button to change the speed.
7If the ingredients stick to the side of
the container, stop the appliance by pressing the power button (
) and wait for the attachment to stop turning. Then remove the lid by pressing the release button, lifting the handle up and pulling straight up. (Fig. 6) Use a spatula to dislodge the pieces, replace the lid and continue processing.
8To remove the container, press the power button (
) to turn the appliance 'Off'. Wait for the attachment to stop moving before removing. (Fig. 7)
CAUTION: Never remove the container while the appliance is still running.
9Depending on the consistency of the contents in the container, open the pouring spout cap and use the spout to empty liquid contents. For thicker consistencies, or for removing dough from the bowl, remove the lid and attachment carefully (by its shaft), then empty contents from the container.
10Unplug the appliance after use.
IMPORTANT: Never run the appliance empty.
CAUTION: Use extreme caution when processing hot foods or liquids to avoid accidental scalding or burns. Do not process food or liquid that is hotter than 180°F/82°C. Allow very hot ingredients to cool before processing.
When processing hot foods or liquids, always open the spout cap to vent the steam. Keep hands and other exposed skin away from the opening to prevent possible burns or scalding.
WARNING: Secure the appliance while in use by pressing down on the lid with one hand.
WARNING: Never leave the appliance unattended while in use.
USING THE 6-BLADE ASSEMBLY
IMPORTANT: Accessories are not interchangeable.
CAUTION: Blades are sharp! Use extreme caution when handling the blade assemblies. Always hold them by the shaft.
IMPORTANT: DO NOT attempt to operate the appliance without the lid on.
1Holding the
2Add the ingredients and secure the pitcher lid onto the pitcher. (Fig. 8)
3Plug the power cord into the electrical outlet and press on the power button (
).
NOTE: Please refer to ‘Speed Settings & Uses’ chart for suggested uses and speeds.
USING THE WHIPPING ATTACHMENT
IMPORTANT: Accessories are not interchangeable.
IMPORTANT: DO NOT attempt to operate the appliance without the lid on.
1Holding the whipping attachment by the shaft, place it onto the gear shaft inside the container. Ensure that the attachment fits snuggly around the gear shaft and that it is standing straight.
2Add the ingredients and secure the pitcher lid onto the pitcher. (Fig. 9)
3Plug the power cord into the electrical outlet and press on the power button (
).
NOTE: Please refer to ‘Speed Settings & Uses’ chart for suggested uses and speeds.
10 | TOLL FREE: |
NJ602W_30_IB_ENG_100426.indd
www.ninjakitchen.com 11
