OPERATING INSTRUCTIONS cont.

Filling with Water

WARNING! Before filling the garment steamer/iron with water, be sure that the unit is not plugged into the electrical outlet. The garment steamer/iron may be filled with water while it is hot.

TO PREVENT THE RISK OF BURNS, use caution when filling garment steamer/iron with water. Burns can occur from touching hot metal parts, hot water or steam.

CAUTION:Never fill the garment steamer/iron with fabric conditioner, starches or any other liquid, as these will damage the steam mechanism. Do not use contaminated water.

NOTE: Because of the soleplate design, ordinary tap water may be used with this appliance. However, in very hard water areas, we recommend using distilled or demineralized water.

1.Disconnect the unit from the power supply.

2.Open the water inlet cover.

3.Using the measuring beaker provided and holding the garment steamer/iron at a slight angle, pour water slowly into the water filling inlet. See illustration.

DO NOT overfill the tank.

4.Plug the cord into a household electrical outlet (see page 3 for voltage settings).

5.Turn the temperature control dial to the desired temperature setting and allow the iron to heat for approximately 2 minutes before ironing. Place iron on its heel (on a stable, protected surface) while the iron is warming to desired temperature. The

pilot light will come on. When the iron has reached the desired temperature, the pilot light will go “Off”.

SETTING THE IRON TEMPERATURE

Set the temperature dial according to the type of fabric .

•Synthetics

(low temperature)

• • Silk, Wool

(medium temperature)

• • • Cotton, Linen (high temperature)

Please note: Before starting to iron delicate fabrics, it is best to first test the temperature of the garment steamer/iron on a hem or an inside seam.

1.Set the temperature control dial to the desired temperature.

2.Stand the unit on its heel and connect it to the main power supply.

3.The pilot light will come on to indicate that the garment steamer/iron is heating up. The light will go “Off” when the set temperature has been reached and the garment steamer/iron is ready to use. The pilot light will go on and off as the thermostat is switching the heating element on and off to maintain the selected temperature.

5

OPERATING INSTRUCTIONS cont.

BURST OF STEAM & CONTINUOUS STEAM (Horizontal & Vertical)

Please note: Before using the garment steamer/iron for the first time, it is important to purge the inside of the iron by allowing it to steam freely for a minute. This allows the removal of any impurities left by the manufacturing process.

WARNING! DO NOT aim iron at face, towards yourself, or anyone else while using or adjusting steam. Burns or serious injury may occur.

1.Make sure that the garment steamer/iron is unplugged from the power source.

2.Fill the unit with water following the instructions for filling on page 5.

3.Plug the power cord into the electrical outlet.

4.Set the temperature control dial within the steam area, i.e. ““• • • ”. (See page 5 for setting the temperature.)

5.The pilot light will go “On”.

6.When the correct temperature has been reached, the pilot light will go “Off”.

7.When the pilot light has gone off, press the steam trigger to produce a strong jet of steam. To prevent water leaking from the soleplate, do not keep the steam trigger depressed for more than 5 seconds. See illustrations below.

8.When using the continuous steam feature, depress the steam trigger and then release. Steam flow will begin shortly after releasing the steam trigger. To maintain a constant flow of steam, depress and release steam trigger again when steam flow has begun to drop.

Burst of Steam

Vertical Steam

Please note: For maximum steam, the temperature control dial should be set at “• • • “.

IMPORTANT: If the garment steamer/iron has not been set to the correct temperature setting for steam, water drops may leak from the soleplate.

6

Page 5 Page 6
Page 6
Image 6
Euro-Pro GI460 W Filling with Water, Setting the Iron Temperature, Burst of Steam & Continuous Steam Horizontal & Vertical
Page 5 Page 6

GI460 W specifications

The Euro-Pro GI460 W is a cutting-edge kitchen appliance designed to revolutionize the way you cook delicious meals with ease and efficiency. At the heart of its design is a powerful heating element that ensures prompt and even cooking, allowing you to prepare a variety of dishes without the long wait times often associated with traditional cooking methods.

One of the standout features of the GI460 W is its advanced multi-functional capabilities. This versatile appliance functions as a grill, griddle, and panini press, making it ideal for a wide range of culinary creations, from juicy burgers and crispy sandwiches to perfect pancakes and stir-fried vegetables. The ability to switch between cooking modes adds significant versatility to your kitchen toolkit.

Another impressive feature of the Euro-Pro GI460 W is its non-stick cooking surface. This technology not only enhances the cooking experience by preventing food from sticking but also simplifies the cleaning process afterward. The appliance is designed for easy maintenance, allowing you to wipe it down quickly after use, saving you valuable time in the kitchen.

The temperature control system of the GI460 W is another significant characteristic worth highlighting. It features several adjustable heat settings, providing you with precise control over the cooking process. This level of customization ensures that your food is cooked to perfection, whether you prefer to sear, simmer, or toast.

In terms of design, the Euro-Pro GI460 W boasts a sleek and compact profile, making it a welcome addition to any kitchen countertop. Its lightweight construction allows for easy portability, meaning you can effortlessly move it around or store it away when not in use.

Safety features are integral to the design of the GI460 W, which include cool-touch handles to prevent burns and an auto shut-off mechanism that provides peace of mind during cooking.

In summary, the Euro-Pro GI460 W stands out with its multifunctional capabilities, non-stick cooking surface, precise temperature controls, and user-friendly design. Whether you're an experienced chef or a cooking novice, this appliance brings convenience and innovation to your culinary adventures, making it a must-have for any modern kitchen.
Top Page Image Contents