GETTING TO KNOW YOUR FOOD PROCESSING
OPERATING INSTRUCTIONS
CENTER
1. | Safety Cover | 14. | Double Chopping Blade |
2. | Safety Cover Release Button | 15. | Chopping Blade Cover |
3. | Main Unit | 16. | Dough Blade |
4. | Pulse/Turbo Button | 17. | Blade Storage |
5. | On/Off Speed Control | 18. | Blade Storage Cover |
6. | Spindle | 19. | Thin Shredding Blade |
7. | Blender Jar | 20. | Thick Shredding Blade |
8. | Measuring Cap (1 oz.) | 21. | Thin Slicing Blade |
9. | Blender Lid | 22. | Thick Slicing Blade |
10. | Food Pusher | 23. | Grating Blade |
11. | Food Processor Lid | 24. | Blade Holder |
12. | Food Processor Bowl | 25. | French Fry Disc Assembly |
13. | Main Chopping Blade | 26. | Spatula |
IMPORTANT: Remove protective blade cover(s) before use. Protective blade covers to only be used for storage.
Technical Specifications
Voltage: | 120V., 60Hz. | |
Power: | 600 Watts | |
Food Processor Capacity: | 6 | Cups (1.5 Liters) |
Blender Capacity: | 7 | Cups (1.75 Liters) |
Speed Control Dial
The food processor speed control dial has two speeds settings plus "Pulse" and "Turbo".
1 - Low
2 - High
The speed can be adjusted while the food processor is in use.
Use of the Pulse/Turbo button allows greater control over the texture of the food being processed. Use "Pulse" when the unit is in the "Off" position. Use "Turbo" when the unit is in the "On" position and you need a burst of power. Please note that the "Pulse" and "Turbo" is only intended to be used for short "bursts" of processing.
Operating the Food Processor
Setting up:
1.CAUTION: Make sure that the unit is unplugged from the power source and the the Speed control dial is in the "Off" position before inserting or removing any attachments and before cleaning.
2.Place the food processor bowl onto the processor body. There is no need to turn the bowl. (Fig. 1)
3.When fitted correctly, the handle will fit into the slot at the base of the unit.
Fig. 1
4.Now you are ready to use any of the attachments that come with the unit; i.e. the double chopping blade, dough blade, etc.
Using The Double Chopping Blade
Always disconnect unit from power source before cleaning or changing accessories.
WARNING: USE EXTREME CAUTION WHEN HANDLING THE BLADES. THEY ARE EXTREMELY SHARP. ALWAYS REMOVE CHOPPING BLADE COVERS BEFORE USING.
The double chopping |
| ||
blade may be |
|
| |
used with one | Fig. 2 |
| |
blade or with |
|
| |
two blades. |
|
| |
1. To use as |
|
| |
a double |
| Double | |
blade, carefully | |||
Blade | |||
slip the separateMain Blade | |||
blade over the shaft of the main blade. (Fig. 2 & Fig. 3)
Fig. 3
Two Blades
Together
2.Then insert onto the shaft of the processor bowl. Always hold the chopping blade by the upper plastic part. (Fig. 4)
Fig. 4
3 | 4 |
