Battery Pack Replacement & Disposal

Fig. 8

OPERATING INSTRUCTIONS

Your Cordless Vacuum is powered by Nickel-Cadmium Ni-Cd) batteries, which must be recycled or disposed of properly in accordance with state, federal and local laws.

If uncertain as to how to remove the battery pack, we suggest you take your hand vacuum to a reputable small appliance service technician to have this service preformed.

DO NOT attempt to replace the batteries used in this product with any other type of battery.

The battery pack of your cordless vac is replaceable, however care should be taken when doing so. Follow these steps when replacement is required:

1.Using a screw driver, remove the single screw securing the battery compartment cover located at the rear of the unit.

2.To remove the cover, press down on the battery compartment cover while sliding towards the rear of the unit.

NEVER open the battery compartment except to change the battery.

3.Set aside battery compartment cover and screw.

4.Carefully disconnect the red lead wire from its connector attached to the battery. Disconnect the

black lead wire from its connector.

5.Lift the battery pack out of the battery compartment and set aside. (Fig. 8)

6.Place the new battery

pack inside the battery compartment so that the battery’s two metal connectors are facing outward and visible to you.

7.Carefully connect the black lead wire to the narrower of the two battery pack connectors. Connect the red lead wire

and the wider connector.

7.Tuck the wiring inside the battery compartment so that the wiring does not interfere with the battery compartment cover when it is replaced.

8.Replace the battery compartment cover.

9.Using a screw driver, replace the screw making sure not to over-tighten the

screw.5

WARNING: NEVER use ordinary batteries for replacement, as these may leak and damage your vacuum cleaner. Use only battery pack XB736N provided by EURO-PRO Operating LLC for replacement.

CAUTION: NEVER use the unit without the battery compartment cover in place.

NOTE: Any other servicing should be performed by an authorized service representative.

CAUTION

•Use only with the battery pack supplied with the unit.

•DO NOT attempt to remove the battery pack from the unit to charge it.

•Never attempt to throw the battery pack or unit into a fire or incinerate it.

•DO NOT attempt to remove or damage the battery casing.

•Battery must be recycled or disposed of properly at the end of it's service life.

•DO NOT place batteries on metal surfaces.

•DO NOT touch metal parts of the batteries together as the batteries will overheat.

Wall Mounting Bracket (Optional)

1.Make sure that the intended wall area for the wall mounting bracket to be drilled is free from any hidden electrical wires, water pipes and gas lines.

2.Select an appropriate place close to a wall power outlet (120V., 60 Hz).

3.DO NOT mount near direct sunlight, near a heat source or outdoors.

4.Select an appropriate drill type for the material to be drilled.

5.Carefully measure and mark the location of all bracket holes and then drill holes and screw the wall mounting bracket onto the wall.

TROUBLESHOOTING GUIDE

PROBLEM	POSSIBLE REASON			POSSIBLE SOLUTION

	1.	Batteries discharged.	1.	Charge unit.
	2.	Dead battery (battery	1.	Charge unit.
HAND VACUUM	2.	Dead battery (battery	2.	Replace batteries.
HAND VACUUM		won't hold charge).	2.	Replace batteries.
WILL NOT		won't hold charge).	3.	Check fuse or breaker.
WILL NOT	3.	No power in electrical	3.	Check fuse or breaker.
OPERATE		outlet supplying		Replace fuse/reset
		outlet supplying		breaker.
		transformer.		breaker.
		transformer.

	1. The 2 metal pins of		1.	Firmly insert the
	1. The 2 metal pins of			motorized brush into the
		the motorized brush		motorized brush into the
		the motorized brush		air-intake nozzle. This
MOTORIZED		are not in contact		air-intake nozzle. This
MOTORIZED		are not in contact		will connect the
BRUSH WILL NOT		with the vacuum		will connect the
BRUSH WILL NOT		with the vacuum		motorized nozzle to the
WORK		cleaner.		motorized nozzle to the
WORK		cleaner.		unit power supply.
	2.	Motorized brush is		unit power supply.
	2.	Motorized brush is	2. Remove all lint, hair etc.
		clogged.	2. Remove all lint, hair etc.
		clogged.		from motorized brush.
				from motorized brush.

	1. Dust cup container is		1.	Empty dust cup
	1. Dust cup container is			container
HAND VACUUM		full.		container
		full.	2.	Remove dust cup filter
	2. Dust cup filter needs		2.	Remove dust cup filter
WILL NOT PICK-	2. Dust cup filter needs			and check for object(s)
WILL NOT PICK-		cleaning or		and check for object(s)
UP OR SUCTION		cleaning or		in air duct and remove.
UP OR SUCTION		replacement.		in air duct and remove.
POWER IS WEAK		replacement.		Clean or replace dust
POWER IS WEAK	3.	Unit needs		Clean or replace dust
	3.	Unit needs		cup filter.
		recharging.		cup filter.
		recharging.	3.	Charge unit.
			3.	Charge unit.

	1. Dust cup container is		1.	Empty dust cup
		full.	1.	Empty dust cup
DUST ESCAPING		full.		container.
DUST ESCAPING	2. Dust cup filter is not			container.
FROM HAND	2. Dust cup filter is not		2.	Review dust cup filter
FROM HAND		installed correctly.	2.	Review dust cup filter
VACUUM		installed correctly.		installation instructions.
VACUUM	3.	Puncture/hole in dust		installation instructions.
	3.	Puncture/hole in dust	3. Replace dust cup filter.
		cup filter.	3. Replace dust cup filter.
		cup filter.

SV736K specifications

The Euro-Pro SV736K is a versatile and efficient vacuum cleaner that stands out in the crowded market of home cleaning appliances. Designed with the modern user in mind, it combines advanced technology with user-friendly features, making it an excellent choice for maintaining a clean and tidy home environment.

One of the key features of the Euro-Pro SV736K is its powerful suction capabilities. Equipped with a robust motor, this vacuum cleaner effortlessly captures dirt, dust, and debris from various surfaces. Whether you're dealing with carpet, hardwood, or tile floors, the SV736K adjusts to different types of flooring, ensuring comprehensive cleaning without the need for multiple devices.

Another notable characteristic of this vacuum is its lightweight and ergonomic design. Weighing in at just under eight pounds, the Euro-Pro SV736K is easy to maneuver, reducing strain on the user during cleaning sessions. The design includes a comfortable grip handle, enhancing usability for extended periods.

The Euro-Pro SV736K also incorporates advanced filtration technology. It features a HEPA filtration system that traps allergens and fine particles, making it an ideal choice for households with allergy sufferers. By effectively capturing up to 99.97% of dust, pollen, and other microscopic irritants, it ensures healthier air quality while you clean.

Moreover, the vacuum cleaner comes with a variety of attachments that enhance its versatility. The crevice tool, dusting brush, and upholstery nozzle allow users to clean hard-to-reach areas, such as corners and furniture, with ease. These attachments can be conveniently stored on the vacuum itself, ensuring they are always within reach when needed.

Another standout feature of the Euro-Pro SV736K is its easy-to-empty dustbin. Rather than dealing with messy bags, users can simply detach the dustbin and dispose of its contents with minimal hassle. This not only saves money on replacements but also contributes to a more eco-friendly cleaning routine.

In summary, the Euro-Pro SV736K vacuum cleaner blends power and convenience, making it an outstanding choice for modern households. Its lightweight design, strong suction, advanced filtration, and versatile attachments cater to the diverse needs of users, ensuring a cleaner living space with minimal effort. Whether tackling everyday messes or deep cleaning tasks, the Euro-Pro SV736K stands out as a reliable cleaning companion.

Euro-Pro SV736K manual Battery Pack Replacement & Disposal, Wall Mounting Bracket Optional

Models: SV736K

OPERATING INSTRUCTIONS