Euro-Pro VPW49HA owner manual Using the Adjustable Lance, Using Brush With the Trigger Gun

Models: VPW49HA

1 6
Download 6 pages 13.52 Kb
Page 5
Image 5
Using the Adjustable Lance

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

CAUTION

When you wish to stop using the pressure washer temporarily, make sure that the trigger lock has been engaged to avoid any accidental operation. (Fig. 12)

Fig. 12

Trigger

Lock

 

Using the Adjustable Lance

The angle of the water on the adjustable lance may be adjusted between 0° and 60° by turning the nozzle adjuster counter-clockwise for a wider angle or clockwise for a narrower angle. (Fig. 13 & Fig. 14) Always make sure that the "On/Off' switch is in the "Off" position before changing the angle of the water jet. It is also recommended that the trigger gun safety lock be engaged as well. The adjustable lance allows you to use any variety of spray pattern from a full fan spray to a direct stream spray. When using the pressure washer to clean wood decks, siding, vehicles, etc., always start using the fan spray and begin spraying from a minimum 36" away to avoid damaging the surface of the material that you are cleaning. Always clear the area that you will be cleaning; of people, pets and objects.

Fig. 13

Fig. 14

Counter-clockwise Clockwise

Using Brush With the Trigger Gun

The brush is used with the trigger gun. Push the brush onto the trigger gun nozzle and turn clockwise to lock as you would for the lance. (Fig. 15) The brush may be used for washing cars, boats, windows and other similar items. The brush operates at open orifice pressure so it will not direct a stream of water.

Fig. 15

Using Detergent with the Pressure Washer

The soap dispenser may only be used with the trigger gun.

Add detergent to the bottle and then attach the soap dispenser to the adjustable lance, just push it firmly onto the end of the trigger gun until it snaps into place. (Fig. 16)

Fig. 16

To remove the soap dispenser, lift the tab on the top of the connector and pull off. (Fig. 17)

Suitable Use of Your Pressure Washer

This high pressure washer is suitable for non-professional use. The working temperature must range between 40°F and 120°F. The machine is supplied with a trigger gun, equipped with a trigger handle to offer a comfortable working position.

The high pressure washer is suitable for washing with cold water only. The water that you use for the pressure washer must not be dirty, sandy or contain any corrosive chemical products.

The pressure washer may be used to wash shutters, doors, tiles, cars, decks, campers, etc., where high water pressure is necessary to remove dirt.

With the soap dispenser, the pressure washer can be used to apply a thick coating of aerated detergent to the areas being cleaned .

When using the pressure washer we recommend the use of personal safety items to reduce the risk of accidental injury.

Unpacking Your Pressure Washer

After you open the package, check to make sure that all the parts are in the box as per parts that are illustrated on page 3 of this guide. Due to transport and packing restraints, some accessories may be supplied unassembled; in this case follow the assembly instructions in this manual. If you have any questions, call Euro-Pro Operating LLC customer service at 1 (800) 798-7398. Keep all small and potentially harmful parts of the packaging (plastic bags, foamed polystyrene, nails, etc.) out of the reach of children.

Correct Use of the Pressure Washer

Place the pressure washer in a safe area and on a horizontal surface.

When using the pressure washer, hold the trigger gun firmly with one hand on the handle and the other on the lance. (Fig. 1)

Fig. 1

NEVER point the water jet at electric wiring, at the pump unit, or at any person or animal.

Fig. 17

7

4

Page 5
Image 5
Euro-Pro VPW49HA Using the Adjustable Lance, Using Brush With the Trigger Gun, Using Detergent with the Pressure Washer