- 10 -
Note 1: Only after enabling the PASSWORD option in Security Function, the display
window of 12 and 13 shows up.
Note 2: Users can adjust the capacities of Public Area I, II and Security Area by
dragging the related scroll bar. The minimum disk capacity of Security Area is 1MB and
minimum disk capacity of Public Area I is 3MB. There is no capacity limitation of Public
Area II.
Note 3: If u sers enable the “Single Partition Format” option, all the data previously
stored in the Public Area and Security Area will be cleared when format completed.
Note 4: “Format.exe” will be duplicated in the thumb drive after formation.
Security Function
14. PASSWORD: After users enable this option, the display window of 15, 16 and 17
becomes valid to edit as shown in the following page. User can key in up to eight
characters used as password (at least one character is required). After enabling this
option, the capacity of Security Area will be shown and allowed to be set in the
PARTITION function. In other word, if this option is not enabled, users are not allowed to
set the capacity of Security Area 〈i.e. no Security Area〉.