I.General
The ED100 & ED200 Series Camera are compact, full functioned CCD Camera. Their stylish appearance can be applied as per installer's ideal locations. These dome camera can be mounted either on the ceiling or on the wall easily. ED100 used high sensitive 1/3" B/W interline transfer CCD sensor and ED200 used high sensitive 1/3" color interline transfer CCD sensor. Both sensors are featured with Auto Electronic Shutter, Automatic Gain Control, and ED200 includes Auto White Balance function.
III.Installation Instructions
nThe Dome camera's horizontal angle of view is
= 2 X Distance between
Camera and Target
pRemove the plastic dome cover. In order to get the correct picture, please always keep the screw indicator of the iron case on the top side.
1)Ceiling Mount :
The dome camera are set in the actual position when the shipment is made. they are ready to be installed.
2) Floor Mount : | screw indicator | ||
Rotate the iron case in |
|
| |
|
| ||
that the screw indicator is on the top |
|
|
|
|
|
| |
|
|
| |
side. |
|
|
|
|
| ||
II. Precautions
•Do not expose the camera to humidity and dust. Outdoor application without shielding is not recommended.
•Handle with care. This camera consists of sensitive high precision parts. Do not disassemble or install it on an unstable base.
•Operate on DC+12V. Use a regulated power source only.
•Never face the camera toward the sun directly.
oIn application, the dome camera can be installed as the following four (4) positions :
1) Ceiling Mount
2) Floor Mount
3) Wall Mount, aim to right
4) Wall Mount, aim to left
3)Wall Mount, aim to right : Remove the iron case from the supporting bracket by using screw driver to loosen the two screws,
which connect the iron case to the support bracket. Turn the iron case in
screw indicator on the top side.
MED1G00200
