ENVS800 / ENVS1600 / ENVS3200 Installation Manual

Safety Precautions

To avoid any damage, please consider the following safety warnings:

Never place the recorder near heaters, furnaces, other heat sources or in direct sunlight.

Operate the device only in locations maintaining the specified operating temperature range 0°C~40°C/32°F ~ +104°F, with moderate relative humidity.

Make sure that the device‘s ventilation slots are not covered or obstructed.

For cleaning, make sure the device is unplugged and only use a damp cloth without caustic detergents.

Install the device only in dry and dustproof surroundings. Protect the device against any possible leaks or spills.

Do not insert or allow anything to fall into the enclosure through the ventilation slots.

Do not attempt to disassemble the NVR. To prevent electric shock, do not remove screws or covers. Contact qualified service personnel for maintenance. Handle the NVR with care. Do not strike or shake, as this may damage the NVR.

Do not operate the NVR with other than specified power supplies. The input power source of the power supply is ~115 VAC/~230 (switchable).

Choose an installation location for the NVR where it will not be subjected to mechanical shock or vibration.

Avoid disconnecting the power cable during operation, or otherwise turning off the power abruptly; use the orderly shutdown methods for MS Windows.

ATTENTION! This is a class A product which may cause radio interference in a domestic environment; in this case, the user may be urged to take adequate measures.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures :

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users’ authority to operate this equipment.

2 of 115

Page 2
Image 2
EverFocus ENVS1600, ENVS800, ENVS3200 manual Safety Precautions, Federal Communication Commission Interference Statement

ENVS800, ENVS3200, ENVS1600 specifications

EverFocus is renowned for producing high-quality video surveillance equipment, and its camera range, including the ENVS3200, ENVS800, and ENVS1600, highlights the brand's commitment to innovation and performance in the security domain. These models exemplify features that cater to various surveillance needs, addressing different environmental conditions and user requirements.

The EverFocus ENVS3200 is designed primarily for outdoor surveillance. It boasts a robust build with an IP66 rating, ensuring protection against dust and water. Equipped with a 3MP image sensor, the ENVS3200 delivers high-resolution video, which is crucial for capturing detailed images across expansive areas. The camera utilizes H.265 compression technology, significantly optimizing bandwidth and storage by reducing file sizes without sacrificing image quality. Enhanced night vision capabilities, enabled by infrared LEDs, allow the ENVS3200 to provide clear footage even in low-light scenarios.

Next is the EverFocus ENVS800, which combines versatility with high performance. This camera supports 4MP resolution, making it suitable for environments where detail is paramount. Its Smart IR feature ensures that night-time footage remains clear by mitigating overexposure from reflective surfaces. The ENVS800 also includes a built-in microphone, providing an additional layer of audio surveillance that can be critical in various applications, from retail management to safety in public venues. The ONVIF compliance of this model facilitates integration with various third-party surveillance systems, enhancing its usability across different platforms.

Lastly, the EverFocus ENVS1600 stands out due to its compact design without compromising functionality. This model is particularly apt for indoor use, where space may be limited. Just like its counterparts, the ENVS1600 supports high-definition video transmission, making it ideal for monitoring sensitive areas, such as entry points or reception areas. Its wide dynamic range (WDR) technology ensures clear images in challenging lighting conditions, balancing both bright and dark areas in a scene. The camera’s flexible mounting options and concise design make it easy to install and unobtrusive in any setting.

Collectively, the ENVS3200, ENVS800, and ENVS1600 showcase EverFocus’s technological advancements, including their emphasis on image quality, environmental resilience, and user-friendly features. These cameras are engineered to meet diverse surveillance needs, offering a blend of reliability and innovation that is crucial for modern security solutions. With their robust characteristics and extensive capabilities, EverFocus continues to be a preferred choice for businesses and individuals seeking effective surveillance systems.