![](/images/new-backgrounds/1118155/118155127x1.webp)
ENVS800 / ENVS1600 / ENVS3200 Installation Manual
Define Object Size | Define the estimated object size by drawing in the video |
| window. |
| If necessary, the object size has to be adjusted again after |
| running simulation (in case of no safe detection). |
Options | 1 Way Counting: Application will count movements from | |
|
| REGION 1 to REGION 2 only. |
| 2 Way Counting: Application counts movements in both | |
|
| directions |
| Sensitivity: | Adjust the detection sensitivity |
|
| depending on the scenery. Use the |
|
| simulation mode for test. This setting is |
|
| also related to OBJECT SIZE setting. |
Runtime | Options for live - display: | |
Show Counting | The number of counted movements is shown as overlay | |
Result | in the live view of the camera. | |
Show Object Bounding | Counted objects are marked in live view of the camera. | |
Box |
|
|
Reset every.... | Time interval for resetting the counting result display in | |
| 64 of 115 |
|