EverFocus ephd04 A

EPHD04+ HDcctv DVR

124

This chapter will give you a basic instruction on how to set up the DVR for network connection. It

is highly recommended that you have a working knowledge of what a network is and how it works.

This will be helpful in completing the networking process.

TCP/IP is the group of protocols used by the Internet and most Local Area Networks (LANs)

throughout the world. In TCP/IP, every computer or other communications device that is

connected to the network has a unique IP address. By doing this you are giving your device a

unique address similar to the address of your house. An IP address is composed of four octets

(numbers in the range of 0 to 255) separated by decimal points. The IP address is used to uniquely

identify a host or computer on the LAN. For example, one computer on a network could have an IP

address of 192.168.1.127.

You should never give two or more devices the same exact IP address, but the first three octets of

an IP address is often the same for all computers in the local area network. For example, if a total

of 253 computers exist in a single LAN, the IP addresses could be assigned starting with

192.168.1.x, where x represents a number in the range of 2 to 254. In IPP address could be

compared with a telephone number.

Each host in a LAN has a subnet mask. The subnet mask is a set of octets that is used to determine

which LAN or class it belongs to. The number 255 is usually used to represent the network address

portion of the IP address and a zero is placed at the end to identify the host portion of the address.

Basically the subnet mask tells the devices how the network addresses are organized, and helps to

determine which addresses are local and which are remote (on the other side of the router).