EPHD04+ HDcctv DVR
16
You have to assign an IP address for your DVR to be accessible. To assign an IP address, you can
use the IP Utility (IPU) program, which can be downloaded from EverFocus’ Website:
http://www.everfocus.com/tools.cfm. Please connect the DVR in the same LAN of your computer.
1. Install and then start the IPU program . The following dialog box appears.
Figure 2-14
2. Click Find Devices to search the IP devices connected in the LAN. The default network
values of the IP devices will be displayed. By default, the network protocol of the IP device
is DHCP.
3. To configure the network settings, select an IP device and then click Login/Multi Login.
Figure 2-15
4. Type the user ID and password. Click OK.
Note:
1. The default user ID is admin and the default password is 11111111.
2. If you select more than one DVRs that have the same user ID / password, you will
be able to log in several DVRs at once.