EPHD04+ HDcctv DVR
83
Defines recording response to “alarm” input trigger signals by time of day on specific days of
the week and/or holidays and ‘other’ days.
Figure 6-22
Alarm: Select a number to change the schedule for that alarm input trigger. Each alarm can
be set on a 24 hour time block for Holiday (Hol), Other (Oth), Sunday (Sun), Monday (Mon),
Tuesday (Tue), Wednesday (Wed), Thursday (Thu), Friday (Fri), or Saturday (Sat).
Time Bar: The time bar uses two different colors to distinguish each recoding mode.
Off: No recording during this time block.
On: Alarm action will be recorded during this time block.
To Set Schedule using Mouse:
1. Click on the “Alarm Action” choice, then click on the right hand side of the screen. The
border for that region will now turn blue.
2. Click on the number of the alarm trigger input you wish to configure. That number will
be framed in blue.
3. Click on a desired start time block on a time bar. There are 24 blocks on the time bar
representing 24 hours respectively. At this time, the selected time bar will be
highlighted by a red frame and the selected block will be highlighted in blue frame.
Initially, the selected block and all following blocks will be gray, which means this gray
timezone has been set to the recording mode corresponding to gray (alarm action
recording OFF).