EPHD04+ HDcctv DVR
78
You can set up the camera recording mode by time of day on specific days of the week and/or
holidays and other days.
Figure 6-20
Camera: Select a camera number to change the schedule for the selected camera. Each
camera can be controlled during a 24-hour time block for Holiday (Hol), Other (Oth), Sunday
(Sun), Monday (Mon), Tuesday (Tue), Wednesday (Wed), Thursday (Thu), Friday (Fri), or
Saturday (Sat).
Time Bar: The time bar uses three different colors to distinguish each recording mode.
Gray (No Rec): No recording during this time block.
Orange (E): Only events are recorded during this time block.
Blue (N+E): (Default) Normal and event recording during this time block.
To Set Schedule using Mouse
1. Click on desired start time block (no numbers on it) on a time bar. At this time, the
selected time block will be highlighted in blue frame and the entire time bar will be
highlighted by red frame. There are 24 blocks on the time bar representing 24 hours
respectively.
2. Set a schedule start time by clicking on a desired start time block on a time bar. Click
again to confirm, and a new sequence number (for this new section) will show on this
block and the current and all following blocks will turn to gray. This means this new gray
timezone has a new record mode (No record).