EverFocus EQ600 WDII instruction manual Back Panel Connections, Back panel connections

Back Panel Connections

2. Back panel connections

(1)

(4)

(8)

(7)

(6)

(5)

(3)

(2)

(9)

(1)S-Video / RS-232 port:

Connect Mini Din Male Connector to S-Video / RS-232 port for better video output quality or communication. Please refer to the pin assignment of the S-Video/ RS-232 port as below:

GND

(2)AC24V/DC12V Compatible Input Terminal: 5V

This power terminal is for connecting the AC24V/DC12V power supply cord

(3)Video Output Connector: Connect the video output of the camera to a color monitor or other video devices through a 75 Ohm type coaxial cable with BNC female connector at backside of the camera.

(4)Tact switcher for left cursor

(5)Tact switcher for down cursor

(6)Tact switcher for right cursor

(7)Tact switcher for up cursor

(8)Tact switcher for on-screen setting menu

(9)Auto Iris Lens Connector

This connector is used to connect with the auto iris lens by a 4 pin male connector

	Pin 1	Pin 2	Pin 3	Pin 4
Video Drive	+12V	GND	VD-IRIS	GND
Direct Drive	Cnt-	Cnt+	Drv+	Drv-

C

RX

TX

Y GND

Y

C GND

4