EverFocus EQ600 WDII Display/Close the user setup menu screen, Press the SET button for 2 second

Operation

3.2 Display/Close the user setup menu screen

SET
Button	Highlighted	EWD600 MAIN MENU
		> PRESETMODE	INDOOR…
		CAMERA ID	OFF
		ADVANCED SETUP …
		SAVE/RESTORE…
		EXIT MENU

The Cursor Buttons & the SET Button

I.Press the SET button for 2 second

The menu screen will appear on the monitor as the block shown above.

II.Using the cursor button

Use the cursor button ￿ or ￿ to move the cursor up or down. Use the cursor button ￿ or

￿to adjust the mode or parameter of settings. The select item will be highlighted with a gray color bar.

III.Switch to sub-menu screens

When the item with sub-menu is selected (highlighted), press the SET button to switch to the sub-menu for further settings. Please refer to the figure below.

EWD600 MAIN MENU			ADVANCED SETUP
PRESET MODE	INDOOR…
			> AUTO IRIS…
CAMERA ID		OFF	WHITE BALANCE…
> ADVANCED SETUP…			LINELOCK…
SAVE/RESTORE…			VIEWING…
EXIT MENU			PREVIOUS PAGE

Main Menu Sub-Menu

Note: For those select items with “…” sign in the end, they have the sub-menu for further settings.

IV.	Return to previous page
	After setting, use the cursor buttons to select PREVIOUS PAGE, then press the SET
	button.
V.	Close the menu screen
	To close the menu screen, use the cursor button to select EXIT MENU and press the
	SET button. Or press the SET button for 1 sec.

6