- 8 -
○
2 Menu button for cursor left movement
○
3 Menu button for cursor up movement
○
4 Button to access on-screen setting menu and for SET command
○
5 Menu button for cursor right movement
○
6 Menu button for cursor down movement
○
7 Power LED
○
8 Video Output Connector
Connect the video output of the camera to a DVR or other video device through a 75 Ohm type coaxial
cable to the BNC female connector at the rear of the camera.
○
9 Power Input Terminal
Connect 12VDC, 24VAC or 100~240VAC power. For 12VDC model, please connect to the correct
polarity.
○
10 Audio Output Connector (for audio model only).
○
11 Ext. Sensor
If a user wants or needs to change the location of the EXT (that is, external and independent of the
camera’s internal AGC circuit) light level sensor, they can use an External light sensor to connect to this
port. (Note: External light sensor kit is an optional product Part # ETHPES-01GR). When this External
sensor port is used, and EXT is selected in the DAY/NIGHT menu, the External sensor will be the
default light level sensor. The jack accepts a 1/8” diameter miniature phono type plug.
○
12 DC Auto Iris Lens Connector
This connector is used to connect with the DC type auto iris lens using a standard 4 pin male connector
Pin 1 Pin 2 Pin 3 Pin 4
Direct Drive Cnt- Cnt+ Drv+ Drv-
4
3 2
1