4.Take off the cap of waterproof conduit which is at the camera bottom.
Power cable (Φ10.3mm)
Coaxial cable | RS485 |
(Φ6mm) | (Φ5mm) |
Note: 1. the holes of waterproof conduit were plugged, please remove the plug when you need to use it for connection.
5.Take coaxial cable, power cable and RS485 cable to pass through waterproof conduit, place them into camera housing.
Note: Do not connect BNC connector to coaxial cable until coaxial cable has passed through camera housing otherwise your cable might not pass the housing.
15
