EverFocus EZ650 manual Pan, Tilt, Area Select, Area Display, Sensitivity

3.3.7.5 D-ZOOM

Setup for digital zoom.

OFF	Disable the D-ZOOM function
ON	D-Zoom:Select digital zoom from X1.0 up to X32. Note that zoom levels
	above X4 may lead to excessive pixellation.
	Setup of the position of the magnified image in view (0 is the center of the
	image):
	Pan:	Select digital pan from -100 to 100.
	Tilt:	Select digital tilt from -100 to 100.

Press “RET” to saves all settings in D-ZOOM menu and returns to the previous menu. Press “END” to save all the setting menus and exit.

3.3.7.6 GAMMA

This menu allows adjustment of gamma correction for ideal linearity of image brightness and contrast in the range 0.05 to 1.0.

3.3.7.7 NEG. IMAGE

Allows user to create a negative of the original image. A negative image is a tonal inversion of a positive image, in which light areas appear dark and vice versa. A negative color image is additionally color reversed, with red areas appearing cyan, greens appearing magenta and blues appearing yellow.

3.3.7.8 RETURN

Return: Press “RET” to save all settings in D-EFFECT menu and return to the previous menu. Press “END” to save all the menu settings and exit.

3.3.7.9 MOTION

This camera enables you to observe movements of objects in 4 different areas on the screen, and the message “MOTION DETECTED” appears on the screen when movement is detected. The camera detects an object’s movement by sensing changes in the pixels displayed.

OFF	Disables the MOTION function.
ON
AREA SELECT	Please select the area you would like to detect from the 4 areas in AREA
AREA DISPLAY	SELECT mode
	Select “ON” to use the motion area selected in sensitivity. Select “OFF” to
LEFT/RIGHT	disable this function.
	Set the coordinate of the horizontal axis 5~66.
WIDTH	Set the size of horizontal area 0~93.
TOP/BOTTOM	Set the coordinate of the vertical axis 1~60.
HEIGHT	Set the size of vertical area 0~60.
SENSITIVITY	Set the sensitivity level for the motion trigger by selecting from 0~40. When
	34