EverFocus EZ650 manual Atw, Awb, Awc -Set, Manual, Indoor, Outdoor, Burst OFF/ON

3.3.4 WHITE BALANCE CONTROL

The screen color can be adjusted by using the WHITE BALANCE function.

Please direct the arrow to point to “WHITE BAL” by using the UP and DOWN buttons. Please select the mode you would like to operate by pressing the LEFT or RIGHT button.

Please select one of the 6 modes below:

ATW	Auto Tracking White Balance: This mode can be used within the color
	temperature range from 5,500°K to 6,000°K (eg, fluorescent light, outdoor,
	sodium vapor lamp or inside tunnels).
AWB	Auto White Balance: This mode can be used within the color temperature range
	from 2,500°K to 10,000°K. (default)
AWC ->SET	To find the optimal setting for the current luminance environment in this mode,
	point the camera toward a sheet of white paper, and press “SET”. If the
	environment changes, you will have to readjust it.
MANUAL	The manual adjustment mode enables a more precise adjustment. Please select
	ATW or AWC first. Then change to manual adjustment mode and press the
	SETUP button. Set the suitable color temperature, and increase or decrease the
	red and blue color values at the same time while checking the color changes of
	the objects in view.
	Press “RET” to save all settings in this menu and return to the previous menu.
	Press “END” to save all the menu settings and exit.
INDOOR	Select this option when the color temperature is 5,600°K.
OUTDOOR	Select this option when the color temperature is 3,300°K

Press “RET” to saves all settings in this menu and returns to the previous menu. Press “END” to save all the menu settings and exit.

3.3.5 DAYNIGHT

These settings control the operation of the camera when the illumination level changes. Choices are Color at all times; B/W at all times; or color when illumination is bright, switching to B/W in low light. PLEASE NOTE: In “color” operation, there is an IR “cut” (blocking) filter between the lens and the sensor; the EZ650 has very little IR sensitivity when the image is displayed in color. The EZ650 camera will have excellent IR sensitivity when displaying a low light B/W picture. To properly utilize the IR illuminators on the EZ650 in low light situations, it is essential to select either the AUTO or the B/W operating mode in this menu.

B/W	The picture is always displayed in B/W.
BURST	OFF/ON:
	ON:	Retains the color burst information; minor color noise may appear
	OFF:	when ambient illumination is low.
		With color burst signal off, picture will be pure B/W.

31