8.Connect RG59 coaxial cable with BNC connector.
9.Unscrew both cable clips, wire power cable and RS485 cable through the cable clips. Then, screw the cable clips to rear panel.
a.Connecting
*Warning*
∙To prevent electrical shock, turn off the electrical power before making electrical connections.
∙Do not connect high voltage power to the camera. It may damage the camera.
∙Do not short circuit the power leads and expose the wire when connecting the power supply to the camera.
b.Connect Video- Make sure connecter is firmly connected.
c.Connecting RS485 (optional): Connect RS585 cable to 485+ and
Power cable
Coaxial cable
RS485 cable
Cable Clips | Cable Clips |
10.Close the back cover and screw the 2 screws firmly. Now, you are done with the installation. NOTE: Before you close the cover, please make sure control key is attached firmly and wire doesn’t stuck.
17
