Figure 1. Parallel 202 Pre-Filter and/or Extra Capacity Surge Tank or Standard Surge Tank Retrofit Kit

PARALLEL-202 PRE-FILTER (EV9100-24)

INSTALLATION

1.Shut off water and electrical power to all affected food service equipment.

It is important that the installation of the pre-filter be clean and sanitary. All water-contact parts shall be immersed in chlorinated water (a capful of bleach per bucket of water) at the start of the installation procedure.

2.Disconnect electrical power and water from the high flow filter system to be served by the Parallel-202 Pre-Filter. Close the inlet water ball valve on the high flow filter system. Disconnect the inlet water line from the high flow filter system ball valve.

3.Select a suitable location near the high flow filter system (not to exceed maximum of 10 ft.) for mounting the pre-filter and install mounting hardware 16" apart (pre-filter mounting plate may be used as a template). The pre-filters overall dimensions are 261⁄16" high x 283⁄4" wide x 81⁄2" deep. Allow at least 21⁄2" below the pre-filter to change out the cartridges. Be sure the mounting hardware is capable of supporting 42 pounds (pre-filter weight when in service).

4.Unscrew both sumps from the pre-filter using the sump wrench, if necessary. Do not lose the O-ring seals. Remove the cartridges and set aside with the sumps and O-rings (if removed).

NOTE: Be sure to use a high quality pipe joint compound or Teflon® tape on all threaded connections.

5.Install a 3/4" NPT x 3/4" barb connector into the the outlet tee of the pre-filter and the inlet water ball valve on the high flow filter system.

6.Measure distance between the barbs on the connectors and cut tubing (not supplied) to this length plus an additional 2". Slide two tubing clamps (not supplied) onto the tubing and install the tubing ends fully onto the connector barbs (not supplied). Fully tighten the tubing clamps to secure the tubing onto each connector barb.

7.Check that the sump O-ring is lubricated. If additional lubricant is required use only a high grade silicone lubricant. Install the O-ring in its respective groove in the sump, remove protective wrap, position the cartridge on the guide seat in the bottom of the sump, then firmly screw the sump into the cap and tighten with the provided sump wrench. DO NOT USE A PIPE WRENCH. Repeat this procedure for the second cartridge and sump.

8.Connect the inlet water line disconnected from the inlet water ball valve on the high flow filter system the inlet water ball valve on the pre- filter.

9.Turn on water to the pre-filter, place the pre-filter ball valve in the ON position (handle parallel to water flow), and press the red pressure relief button on one cap to open the pressure relief valve, purging air from the high flow filter system. When water vents out, release the button and repeat for the pressure relief on the second cap.

Page 1 Page 3
Page 2
Image 2
Everpure EV3097-09, EV3098-41, EV3092-54, EV9336-52, EV9336-51, EV3057-83 PARALLEL-202 PRE-FILTER EV9100-24, Installation
Page 1 Page 3

EV3098-41, EV9108-40, EV3057-83, EV3099-62, EV9100-24 specifications

The Everpure brand is synonymous with premium water filtration systems that are ideal for both commercial and residential applications. Among its impressive lineup, models EV3047-10, EV9100-24, EV3034-83, EV3057-83, and EV3098-41 stand out due to their advanced features and cutting-edge technologies.

The EV3047-10 is designed specifically for high-flow applications, making it a top choice for restaurants and cafes. It utilizes a carbon-block filtration system that effectively removes chlorine taste and odor, sediment, and other impurities, ensuring the highest quality drinking water and ice. Its impressive flow rate significantly enhances efficiency, making it suitable for busy environments.

The EV9100-24 model is renowned for its innovative micro-filtration technology. It is capable of reducing cysts, bacteria, and other harmful contaminants, providing users with safe and clean water. This filter also features a scale reduction technology that helps protect equipment like espresso machines and ice makers from mineral buildup, ultimately extending their life and performance.

The Everpure EV3034-83 offers unique features tailored for fountain and beverage applications. It includes a patented pre-coat filtration system that removes particulates and contaminants effectively. This model's easy-change cartridge design makes maintenance a breeze, allowing for quick filter replacements without complicated procedures, which is vital for operations that require uninterrupted service.

Model EV3057-83 incorporates advanced filtration technology, delivering exceptional water quality for food service and coffee preparation. Its proprietary blend of filtration media targets impurities that affect taste and odor, ensuring a consistently great flavor in every cup or dish. Additionally, this model is equipped with a built-in scale inhibitor that protects appliances from the damaging effects of hard water, significantly reducing maintenance costs.

Lastly, the EV3098-41 is designed for heavy-duty applications, catering to businesses that demand high-capacity filtration. Utilizing the latest in filtration innovation, this model boasts a unique dual-stage system that provides advanced protection against contaminants while improving water clarity and taste. Its robust construction allows it to handle high volumes, making it an invaluable asset in busy commercial settings.

In summary, Everpure's EV3047-10, EV9100-24, EV3034-83, EV3057-83, and EV3098-41 models showcase the brand's commitment to providing exceptional water filtration solutions. With their unique features, advanced technologies, and hassle-free maintenance options, these models cater to a variety of needs, ensuring that users receive clean, great-tasting water in any setting. Whether for a bustling restaurant or a small café, Everpure continues to lead the way in water filtration innovation.
Top Page Image Contents