¾Expert
Use the Page Up and Page Down keys to select Expert. When Expert is selected, all timing categories are enabled for manual input. Note that you should set the value to Optimal to use the manufacturers’ recommended values.
Parameters | Settings Current Value | |||
Memory Timing Setting | [ |
| ] |
|
Expert |
| |||
tCL (CAS Latency) |
| [Auto(7)] |
| 7 |
tRCD | [Auto(7)] | 7 | ||
tRP | [Auto(7)] | 7 | ||
tRAS | [Auto(20)] | 20 | ||
Command Per Clock (CMD) | [Auto(1T)] | 1T | ||
** Advanced Memory Settings ** | 4 | |||
tRRD | [Auto(4)] | |||
tRC | [Auto(27)] | 27 | ||
tWR | [Auto(10)] | 10 | ||
tWTR | [Auto(14)] | 14 | ||
tREF | [Auto] | 7.8uS |
¾tCL: CAS# latency (options are Auto and 1 through 7).
¾tRCD:
¾tRP: Row Precharge time. This is the
¾tRAS: This is the minimum RAS# active time (options are Auto and 1 through 31).
¾Command Per Clock: This is the command timing setting on a per clock unit basis (options are Auto, 1 Clock and 2 Clock).
¾tRRD:
¾tRC:
¾tWR: The Write recovery time (options are Auto and 2 through 6).
¾tWTR: This is the minimum
¾tREF: This is the DRAM refresh rate (options are Auto, 7.8uS, and
3.9uS)..