Installing Disks 1 to, Installing CD1 | Nortel Networks V100

Installing Disks 1 to 3

Copyright © 2006 Nortel Networks

Installing Disks 1 to 3

ATTENTION

Refer to the customer-specific information datasheet for host name, IP addresses, subnet masks, and so on.

ATTENTION

For installation on a brand-new machine, connect through the terminal server to the A/LOM port until after you have installed CD5. Then log out.

Log back in through the terminal server to B/Serial port for the rest of the installation.

For installations on machines that have already had a system installed, just remain on the B/Serial port.

ATTENTION

The first time you connect to a server, it generates a PuTTY Security Alert. Select Yes from the dialog box that appears. You will then be asked to log in. Use your nortel account and enter the password you have set. The passwords are time sensitive and will expire after the set number of days.

Installing CD1

Approximate time estimate = 45 minutes

Procedure 12 Installing CD1

At the management pc,

1Place CD1 in the CD-ROM drive.

MCS 2-server Sun Fire V100 Solaris Installation and Commissioning Guide

Image 47

Nortel Networks V100 manual Installing Disks 1 to, Procedure 12 Installing CD1, At the management pc

Contents

NN10364-301 2-server Sun Fire V100 Solaris Installation and Commissioning GuideMultimedia Communication Server Page Setting up the baseline hardware Finding the latest updates on the Nortel Web siteHow to get help Before you start the installation Configuring the Provisioning Module Installing Disk 6 MgmtSvr/AcctMgr onlyInstalling and launching the System Management Console Installing the UFTP BaseSoftware Deploying the PC Client Installing the iPlanet MonitorVerification procedures Reloading IP addresses after system installation NN10364-301 MCS 5100 3.5 Standard 6.0 December Documentation Finding the latest updates on the Nortel Web siteLatest Software Latest NN10364-301 MCS 5100 3.5 Standard 6.0 December How to get help Getting help over the phone from a Nortel Solutions CenterGetting help from the Nortel web site Getting help through a Nortel distributor or reseller Getting help from a specialist by using an Express Routing Code Overview Figure 1 2-server network with redundant Ethernet switches source Figure 2 2-server network with single Ethernet switchProtected power Restrictions and limitations Media Application Server IM Chat Service Guide, NN10380-113 MCS 5100 Ad Hoc Audio Conferencing Service Guide, NN10297-111Media Application Server - Music on Hold Service Guide, NN10378-113 Media Application Server Announcements Service Guide, NN10379-113 MCS 5100 Performance Management OM reference , NN10386-700 MCS 5100 Fault Management Alarm and Log reference, NN10385-900 NN10364-301 MCS 5100 3.5 Standard 6.0 December Prerequisites Before you start the installation Acronyms asked to Key stroke symbolsWhen you are Text conventions used in this document Loading disks Server configurationTable 1 2-server configuration Configuration Approximatetime to installTable 2 Mapping of Kit NTVW01BD disks to servers with times MCS Base Platform System NN10364-301 MCS 5100 3.5 Standard 6.0 December Minimum and recommended requirements for customer-provided PC mouse required Video Graphics Card Figure 3 Hardware connections overview Setting up the baseline hardwareBaseline hardware Hardware required for the 2-server system consists of the following At the rack Setting up rack to mount hardwareProcedure 1 Setting up rack to mount hardware At the back of the Sun Fire V100 server Connecting the Sun Fire V100 server to the layer-2 switchProcedure 2 Connecting the V100 server to the layer-2 switch Figure 4 MCS 5100 19-inch rack Figure 6 Sun Fire V100 server cabling to layer-2 switch Connecting the Sun Fire V100 server to the MRV LX terminal server Figure 7 Sun Fire V100 server network callouts See note Figure 8 P1 and P2 custom cable connections to terminal serverNote This cable is only connected to configure the terminal server Following configuration, remove the cable NN10364-301 MCS 5100 3.5 Standard 6.0 December At the browser address field Installing and accessing the MRV LX-4000 series terminal serverProcedure 5 Accessing the MRV LX terminal server At the terminal server 2 Make sure you have the Java Plug-in installed Figure 9 MRV Configuration Console windowFigure 10 Java Security Warning pop-up window Figure 11 LX Series Configuration Console page 7 If you log in as a user, the following window appears Figure 12 Login window6 Enter your Username and Password, and click Login Figure 13 User login window Figure 14 Example selecting Ports Async Figure 15 Port 19 dialog box InReach Procedure 7 Changing the password defaultsAt the management pc Name the HyperTerminal Session termserv Enter Procedure 8 Accessing the MRV LX terminal server 8 Define server ip address IP address of the terminal server Procedure 9 Connecting a server to the MRV LX terminal server 4 For port, enter the port number which corresponds to A/LOM Serial A on the V100 and the MRV LX terminal server NN10364-301 MCS 5100 3.5 Standard 6.0 December At the server Powering on the serversProcedure 10 Powering on the servers Procedure 11 Power on to get the ok prompt 4 The ok prompt appears Procedure 12 Installing CD1 Installing Disks 1 toInstalling CD1 Select a Language Powering on the servers on pageWhat type of terminal are you using? Solaris Installation Program Page Host name/Host name Network Connectivity/NetworkedDHCP/Use DHCP Primary Network Interface /Primary Network Interface Netmask/Netmask IPv6/Enables IPv6Configure Security Policy Name Service/Name Service identification is completed 1 2-server Micro Configuration 2 4 or 4+ Standard ConfigurationContinuing the process Installing CD2 Procedure 13 Installing CD2 Installing CD3 Procedure 14 Installing CD3 Database/Accounting/Management server DBSvr, AcctMgr, MgmtSvr Installing DiskProcedure 15 Installing CD4 Refer to the CSI for NTP time source IP information Physical IP address of the dmfe1 interface Enter ”You are now configuring IPMP Multipathing Enter ping target #1 Enter ping target #2 Enter ping target #3 Obtaining IP Addresses for SysMgr/AcctMgr Failover Operation Procedure 16 Installing CD4 Enter ping target #2 120.120.13.1Enter Physical IP address of the dmfe1 interfaceExample Enter ping target #1 120.120.13.22Enter Figure 17 Application server IPMP configuration summary Procedure 17 Installing CD5 Installing Disk 5 all servers NN10364-301 MCS 5100 3.5 Standard 6.0 December etc/init.d/volmgt start Procedure 18 Enabling or disabling the CD-ROM auto-mountEnabling or disabling the automatic mount NN10364-301 MCS 5100 3.5 Standard 6.0 December Procedure 19 Installing CD Installing Disk 6 MgmtSvr/AcctMgr only NN10364-301 MCS 5100 3.5 Standard 6.0 December 4 cd space /cdrom/cdrom0 Enter Installing Oracle 9.2.0.4 on the database serverInstalling Oracle Procedure 20 Installing Oracle 9.2.0.4 on the database server DBSvr 7 ./InstallCDtoDisk Enter cp space InstallCDtoDisk space / Enter 6 cd space / Enter cd space /IMS/oracds/Disk1 Enter PromptDefinition Enter grepspace-Ispaceerrorspaceoracleinstall.log Deploying the MCS database load imssipdb Procedure 21 Deploying the initial database load imssipdbDeploying the initial database load Select the Type of Deployment 1 Initial Deployment Deploying and starting the Sysmgr Procedure 22 Deploying and starting the SysmgrDeploying and starting the Sysmgr Example @micromgmt/export/home/nortel= mgmtdeploy.pl Rel3 Procedure 23 Verifying the Sysmgr deploymentSysmgr deployment verification @micromgmt /export/home/nortel= meinit -p NN10364-301 MCS 5100 3.5 Standard 6.0 December Registering your license key Procedure 24 Registering the license key Figure 18 KRS login screen Figure 19 Keycode Retrieval System, Creating your site Figure 20 Keycode Retrieval System, Entering your site information 10 Enter the MAC addresses of the CORE servers and click on Add Figure 21 Keycode Retrieval System, Current Summary Figure 22 Keycode Retrieval System, Adding MAC address Figure 23 Keycode Retrieval System, Adding a Media Application Server Figure 24 Keycode Retrieval System, Current Summary Figure 25 Keycode Retrieval System, Gen KC with Auth Code Figure 26 Keycode Retrieval System, Finding the keycode Figure 27 Keycode Retrieval System, Adding a MAC address Figure 28 Keycode Retrieval System, Entering the authcode Best Customer Figure 29 Keycode Retrieval System, Summary of features Figure 30 Keycode Retrieval System, Retrieving the keycode 24 Download the new license key file to the MgmtSvr hard drive Figure 31 Keycode Retrieval System, Retrieving your keycode, part NN10364-301 MCS 5100 3.5 Standard 6.0 December Procedure 25 Installing the System Management Console Installing and launching the System Management ConsoleInstalling the System Management Console 1 Click Start -Programs -MCP-System Management Console Procedure 26 Launching the System Management ConsoleLaunching the System Management Console Figure 32 Management Console Update License Key Figure 33 Select License key File Window Copyright 2006 Nortel Networks NN10364-301 MCS 5100 3.5 Standard 6.0 December At the System Management Console Procedure 27 Adding a serverAdding a server Adding a server Example 4 Select Add - Component Adding and configuring the Accounting ModuleProcedures Procedure 28 Adding an Accounting Module component to the server Recommended value Procedure 29 Configuring the tabsTable 1 Central Accounting Manager tab Sheet 1 of Parameter Table 1 Central Accounting Manager tab Sheet 2 of NN10364-301 MCS 5100 3.5 Standard 6.0 December 1 Select Sites-MgmtSite-Servers-Add-General-AppSvr Adding and configuring the SIP Application ModuleProcedure 30 Adding the SIP Application Module component value Procedure 31 Configuring the SIP Application Module tabsTable 2 Authentication tab Sheet 1 of Recommended Table 3 Local Accounting Manager tab Sheet 1 of Table 2 Authentication tab Sheet 2 of Table 4 Media Portal tab Table 5 Prov Sync Service tabdefault Table 3 Local Accounting Manager tab Sheet 2 of Table 8 In Memory Database tab Sheet 1 of Table 6 Database Base tabTable 7 SIP TCF Base tab Maximum Registration Duration Table 9 Location Service Manager tabTable 10 Registrar Service tab Table 8 In Memory Database tab Sheet 2 of maximumExpires Table 13 Long Call Service tabTable 11 Server Subscription tab Table 12 Subscription Processing tab NN10259-111 Table 14 Server Properties tab Sheet 2 ofMCS SIP Application Module Basics Table 16 Transport Management tab Sheet 1 of Table 15 Overload Controls tab ContinuedDatabase queue low threshold Protocols Monitored Table 16 Transport Management tab Sheet 2 of Table 16 Transport Management tab Sheet 3 of NN10364-301 MCS 5100 3.5 Standard 6.0 December Example IPCM1 Adding and configuring the IP Client ManagerProcedure 32 Adding the IP Client Manager Small SharedMicro component Recommended Value Procedure 33 Configuring the IP Client Manager tabsTable 17 IP Client Manager tab Sheet 1 of Table 18 Database Base tab Table 17 IP Client Manager tab Sheet 2 of Value Table 21 Conference Service tabTable 19 UNISTIM Base tab Table 20 SIP TCF Base tab Table 22 In Memory Database tab Table 23 Prov Sync Service tab NN10364-301 MCS 5100 3.5 Standard 6.0 December 1 Select Sites-MgmtSite-AppSvr Installing the UFTP BaseSoftwareProcedure 34 Adding the UFTP software Add the UFTP to the System Management Console NN10364-301 MCS 5100 3.5 Standard 6.0 December 4 Select Add-Component Configuring the Provisioning ModuleProcedure 35 Adding the Provisioning Module Small SharedMicro 1 Select Sites-MgmtSite-Servers-AppSvr Table 25 User Agent Server tab Procedure 36 Configuring the Provisioning Module tabsTable 24 SIP TCF Base tab Table 26 Web Client Manager tab Sheet 1 of Table 25 User Agent Server tab Continued Maximum User Picture Size Table 26 Web Client Manager tab Sheet 2 ofTable 27 Database Base tab Table 28 SIP Personal Agent tab Table 29 Provisioning Client tab Table 30 ConferenceService tab NN10364-301 MCS 5100 3.5 Standard 6.0 December Example WCM1 Adding and configuring the Web Client ManagerProcedure 37 Adding the Web Client Manager Small SharedMicro Table 31 User Agent Server tab Procedure 38 Configuring the Web Client Manager tabs Table 33 Web Client Manager tab Sheet 1 of Table 32 SIP TCF Base tab Table 33 Web Client Manager tab Sheet 2 of Table 34 ConferenceService tab Table 35 Database Base tab NN10364-301 MCS 5100 3.5 Standard 6.0 December Example Oramn1 Installing and configuring the Oracle Monitor1 Select Sites-MgmtSite-Servers-MgmtSvr Table 36 Oracle Server tab Procedure 40 Configuring the Oracle Monitor tabs Table 37 IMS Main Database tab Sheet 1 of Table 37 IMS Main Database tab Sheet 2 of Table 37 IMS Main Database tab Sheet 3 of Table 38 Database Base tab Table 37 IMS Main Database tab Sheet 4 of Table 39 Oracle Listeners tab NN10364-301 MCS 5100 3.5 Standard 6.0 December Example iPIMon Installing the iPlanet MonitorProcedure 41 Adding the iPlanet Monitor Table 40 Web Monitor tab Sheet 1 of Procedure 42 Configuring the iPlanet Monitor Table 40 Web Monitor tab Sheet 2 of Table 40 Web Monitor tab Sheet 3 of Table 40 Web Monitor tab Sheet 4 of Table 40 Web Monitor tab Sheet 5 of Table 40 Web Monitor tab Sheet 6 of Table 40 Web Monitor tab Sheet 7 of Table 40 Web Monitor tab Sheet 8 of Table 40 Web Monitor tab Sheet 9 of Table 40 Web Monitor tab Sheet 10 of Table 40 Web Monitor tab Sheet 11 of Table 40 Web Monitor tab Sheet 12 of NN10364-301 MCS 5100 3.5 Standard 6.0 December Verifying Server1 DBSvr/MgmtSvr/AcctMgr Verification proceduresProcedure 43 Verifying the database server 1 Log into the server as nortel/new nortel user password 120.120.13.20 micromgmtdmfe0 120.120.13.21 micromgmtdmfe1 @micromgmt/export/home/nortel= cat /etc/defaultrouter@micromgmt/export/home/nortel= cat /etc/hosts # # Internet host table # 127.0.0.1 localhost 120.120.13.22 micromgmt loghost 120.120.13.1 Procedure 44 Verifying the application serversVerifying Server2 application server # 127.0.0.1 localhost @microapp/export/home/nortel= cat /etc/defaultrouter@microapp/export/home/nortel= cat /etc/hosts # # Internet host table @micromgmt /export/home/nortel= tail -f /tmp/*SQL Procedure 45 Verifying the database load imssipdb deploymentVerifying the database load imssipdb deployment NN10364-301 MCS 5100 3.5 Standard 6.0 December Appendix A Deploying the PC Client NN10364-301 MCS 5100 3.5 Standard 6.0 December Appendix B Reloading IP addresses after system installation usr/local/bin/unconfigserver Procedure 46 Reloading IP addresses after system installation Select 2 and press Enter #/usr/local/bin/Interface.pl add sysmgr #/usr/local/bin/Interface.pl add acctmgr NN10364-301 MCS 5100 3.5 Standard 6.0 December Copyright 2006 Nortel NetworksPage Multimedia Communication Server 2-server Sun Fire V100 Solaris Installation and Commissioning Guide