Nortel Networks V100 Adding and configuring the Accounting Module, Procedures, Example acct1

Copyright © 2006 Nortel Networks

Adding and configuring the Accounting Module

Prerequisites

Make sure that

•The System Management Console has been successfully installed and started.

•A valid license key has been entered and accepted by the management system.

Procedures

Procedure 28 Adding an Accounting Module component to the server

At the System Management Console,

1Select Sites->MgmtSite->Servers->Add->General->MgmtSvr.

See Adding a server on page 101 for information on how to add a server before adding the AcctMgr.

2Click on the plus sign next to the server to which you are adding the component.

3Right click on the Components folder.

4Select Add -> Component.

5A list of component loads appears in the Load List window. Select the latest Small load.

6Click Apply. Wait for the new component and the component configuration window to appear.

7Enter a label (maximum six [6] characters) in the Service Component Name field at the bottom of the configuration window. The Service Component Name must be unique among all components.

Example: acct1

MCS 2-server Sun Fire V100 Solaris Installation and Commissioning Guide