Nortel Networks V100 Procedure 42 Configuring the iPlanet Monitor, Web Monitor tab Sheet 1 of

Copyright © 2006 Nortel Networks 148

Procedure 42 Configuring the iPlanet Monitor

At the System Management Console, 1

ATTENTION

Do not click Apply until you have finished configuring the tab.

Use the values from the table that follows to complete the Web

Monitor tab parameters.

Note: The shaded rows indicate values that must be addressed by the installer.

Table 40 Web Monitor tab (Sheet 1 of 12)

Parameter	Recommended value	Notes	Example
SNMP request port	8161		default
SNMP agent IP address	<machine logical IP of		192.168.14.41
	Provisioning Module>		120.120.13.25
Active	checked		default
Component Monitoring:	com.nortelnetworks.i		default
Class name	ms.mw.probe.iplanet.I
	planetProcessHandler
Component Monitoring:	Process Stats		default
Component name
Component Monitoring:	1		default
Polling interval in minutes
Component Monitoring:	checked		default
Active for polling
Component Monitoring:	percentConnectionQu		default
Threshold monitors:	eueUsage
Gauge name
Component Monitoring:	100		default
Threshold monitors:
Upper limit

NN10364-301 MCS 5100 3.5 Standard 6.0 December 2006