Nortel Networks V100 manual Obtaining IP Addresses for SysMgr/AcctMgr Failover Operation

Models: V100

1 176
Download 176 pages 1.49 Kb
Page 59
Image 59
Obtaining IP Addresses for SysMgr/AcctMgr

Copyright © 2006 Nortel Networks

59

You will see the following message:

Obtaining IP Addresses for SysMgr/AcctMgr

Failover Operation

Note: If you don't have plan to configure the failover service, type in the same primary service logical IP address and primary machine logical IP address or type 0.0.0.0 instead.

17Enter the <Machine Logical IP Address of the other MgmtSvr> (in dot-notation format).

Example: 120.120.13.22

18Enter the <service logical IP address of the SysMgr> (in dot-notation format).

Example: 120.120.13.22

19Enter the <service logical IP of the AcctMgr> (in dot-notation format).

Example: 120.120.13.22

”You have entered the following IP addresses: Machine Logical IP Address of the other MgmtSvr: 120.120.13.22

Service Logical IP Address of SysMgr: 120.120.13.22

Service Logical IP Address of AcctMgr: 120.120.13.22

20Is this information correct? (y/n)

If the information is correct, press Y and Enter.

21You are now configuring the Syslog daemon. Press Enter to continue.

22Is this the Redundant Configuration Accounting Server Machine [Y/N]? Select N.

The system will now reboot and come up requesting that you insert CD5.

CD4 will eject from the CD-ROM drive when installed.

ATTENTION

If you are not prompted for CD5, contact support.

Application servers (SIP Application Module, IPCM, Web Client Manager, Provisioning Module)

Approximate time estimate = 15 minutes

MCS 2-server Sun Fire V100 Solaris Installation and Commissioning Guide

Page 59
Image 59
Nortel Networks V100 manual Obtaining IP Addresses for SysMgr/AcctMgr Failover Operation