Oracle Server tab, Parameter, Example | Nortel Networks V100

Procedure 40 Configuring the Oracle Monitor tabs

Copyright © 2006 Nortel Networks

140

Procedure 40 Configuring the Oracle Monitor tabs

ATTENTION

Do not click Apply until you have finished configuring the component.

At the System Management Console,

1Use the values from the table that follows to complete the Oracle Server tab parameters.

The shaded rows indicate values that must be addressed by the installer.

Table 36 Oracle Server tab

Parameter	Recommended value	Notes	Example

SNMP request port	9161		default

SNMP agent IP address	<either the word		192.168.14.31
	"localhost" or the		120.120.13.22
	machine logical IP
	address of the database
	server that this Oracle
	Monitor is running on>

Oracle Server name	imsdb1		default

Active	checked		default

Monitor functions:	GeneralInfo		default
Handler name

Monitor functions:	1		default
Polling interval (min)

Active	checked		default

Monitor functions:	OperationalStatus		default
Handler name

Monitor functions:	1		default
Polling interval (min)

Active	checked		default

2Use the values from the table that follows to complete the IMS Main Database tab parameters.

NN10364-301 MCS 5100 3.5 Standard 6.0 December 2006

Image 140

Nortel Networks V100 Procedure 40 Configuring the Oracle Monitor tabs, Oracle Server tab, At the System Management Console

Contents

NN10364-301 2-server Sun Fire V100 Solaris Installation and Commissioning GuideMultimedia Communication Server Page Finding the latest updates on the Nortel Web site How to get helpBefore you start the installation Setting up the baseline hardware Installing Disk 6 MgmtSvr/AcctMgr only Installing and launching the System Management ConsoleInstalling the UFTP BaseSoftware Configuring the Provisioning Module Installing the iPlanet Monitor Verification proceduresReloading IP addresses after system installation Deploying the PC Client Copyright 2006 Nortel Networks Finding the latest updates on the Nortel Web site Latest SoftwareLatest Documentation Copyright 2006 Nortel Networks How to get help Getting help over the phone from a Nortel Solutions CenterGetting help from the Nortel web site Getting help from a specialist by using an Express Routing Code Getting help through a Nortel distributor or reseller Figure 1 2-server network with redundant Ethernet switches Overview source Figure 2 2-server network with single Ethernet switchProtected power Restrictions and limitations MCS 5100 Ad Hoc Audio Conferencing Service Guide, NN10297-111 Media Application Server - Music on Hold Service Guide, NN10378-113Media Application Server Announcements Service Guide, NN10379-113 Media Application Server IM Chat Service Guide, NN10380-113 MCS 5100 Fault Management Alarm and Log reference, NN10385-900 MCS 5100 Performance Management OM reference , NN10386-700 Copyright 2006 Nortel Networks Before you start the installation Prerequisites Acronyms Key stroke symbols When you areText conventions used in this document asked to Server configuration Table 1 2-server configurationConfiguration Loading disks to install Table 2 Mapping of Kit NTVW01BD disks to servers with timesMCS Base Platform System Approximatetime Copyright 2006 Nortel Networks Minimum and recommended requirements for customer-provided PC mouse required Video Graphics Card Figure 3 Hardware connections overview Setting up the baseline hardwareBaseline hardware Hardware required for the 2-server system consists of the following At the rack Setting up rack to mount hardwareProcedure 1 Setting up rack to mount hardware Connecting the Sun Fire V100 server to the layer-2 switch Procedure 2 Connecting the V100 server to the layer-2 switchFigure 4 MCS 5100 19-inch rack At the back of the Sun Fire V100 server Connecting the Sun Fire V100 server to the MRV LX terminal server Figure 6 Sun Fire V100 server cabling to layer-2 switch Figure 7 Sun Fire V100 server network callouts Figure 8 P1 and P2 custom cable connections to terminal server Note This cable is only connected to configure the terminal serverFollowing configuration, remove the cable See note Copyright 2006 Nortel Networks Installing and accessing the MRV LX-4000 series terminal server Procedure 5 Accessing the MRV LX terminal serverAt the terminal server At the browser address field 2 Make sure you have the Java Plug-in installed Figure 9 MRV Configuration Console windowFigure 10 Java Security Warning pop-up window Figure 11 LX Series Configuration Console page 7 If you log in as a user, the following window appears Figure 12 Login window6 Enter your Username and Password, and click Login Figure 13 User login window Figure 14 Example selecting Ports Async Figure 15 Port 19 dialog box InReach Procedure 7 Changing the password defaultsAt the management pc Procedure 8 Accessing the MRV LX terminal server Name the HyperTerminal Session termserv Enter Procedure 9 Connecting a server to the MRV LX terminal server 8 Define server ip address IP address of the terminal server 4 For port, enter the port number which corresponds to A/LOM Serial A on the V100 and the MRV LX terminal server Copyright 2006 Nortel Networks Powering on the servers Procedure 10 Powering on the serversProcedure 11 Power on to get the ok prompt At the server 4 The ok prompt appears Procedure 12 Installing CD1 Installing Disks 1 toInstalling CD1 Powering on the servers on page What type of terminal are you using?Solaris Installation Program Page Select a Language Network Connectivity/Networked DHCP/Use DHCPPrimary Network Interface /Primary Network Interface Host name/Host name IPv6/Enables IPv6 Configure Security PolicyName Service/Name Service Netmask/Netmask identification is completed 1 2-server Micro Configuration 2 4 or 4+ Standard ConfigurationContinuing the process Installing CD2 Installing CD3 Procedure 13 Installing CD2 Procedure 14 Installing CD3 Database/Accounting/Management server DBSvr, AcctMgr, MgmtSvr Installing DiskProcedure 15 Installing CD4 Refer to the CSI for NTP time source IP information ”You are now configuring IPMP Multipathing Physical IP address of the dmfe1 interface Enter Enter ping target #1 Enter ping target #2 Enter ping target #3 Obtaining IP Addresses for SysMgr/AcctMgr Failover Operation Procedure 16 Installing CD4 Physical IP address of the dmfe1 interface ExampleEnter ping target #1 120.120.13.22Enter Enter ping target #2 120.120.13.1Enter Figure 17 Application server IPMP configuration summary Installing Disk 5 all servers Procedure 17 Installing CD5 Copyright 2006 Nortel Networks etc/init.d/volmgt start Procedure 18 Enabling or disabling the CD-ROM auto-mountEnabling or disabling the automatic mount Copyright 2006 Nortel Networks Installing Disk 6 MgmtSvr/AcctMgr only Procedure 19 Installing CD Copyright 2006 Nortel Networks Installing Oracle 9.2.0.4 on the database server Installing OracleProcedure 20 Installing Oracle 9.2.0.4 on the database server DBSvr 4 cd space /cdrom/cdrom0 Enter cp space InstallCDtoDisk space / Enter 6 cd space / Enter 7 ./InstallCDtoDisk Enter Prompt DefinitionEnter cd space /IMS/oracds/Disk1 Enter grepspace-Ispaceerrorspaceoracleinstall.log Deploying the MCS database load imssipdb Procedure 21 Deploying the initial database load imssipdbDeploying the initial database load Select the Type of Deployment 1 Initial Deployment Deploying and starting the Sysmgr Procedure 22 Deploying and starting the SysmgrDeploying and starting the Sysmgr Example @micromgmt/export/home/nortel= mgmtdeploy.pl Procedure 23 Verifying the Sysmgr deployment Sysmgr deployment verification@micromgmt /export/home/nortel= meinit -p Rel3 Copyright 2006 Nortel Networks Procedure 24 Registering the license key Registering your license key Figure 18 KRS login screen Figure 19 Keycode Retrieval System, Creating your site Figure 20 Keycode Retrieval System, Entering your site information Figure 21 Keycode Retrieval System, Current Summary 10 Enter the MAC addresses of the CORE servers and click on Add Figure 22 Keycode Retrieval System, Adding MAC address Figure 23 Keycode Retrieval System, Adding a Media Application Server Figure 24 Keycode Retrieval System, Current Summary Figure 25 Keycode Retrieval System, Gen KC with Auth Code Figure 26 Keycode Retrieval System, Finding the keycode Figure 27 Keycode Retrieval System, Adding a MAC address Figure 28 Keycode Retrieval System, Entering the authcode Figure 29 Keycode Retrieval System, Summary of features Best Customer Figure 30 Keycode Retrieval System, Retrieving the keycode Figure 31 Keycode Retrieval System, Retrieving your keycode, part 24 Download the new license key file to the MgmtSvr hard drive Copyright 2006 Nortel Networks Procedure 25 Installing the System Management Console Installing and launching the System Management ConsoleInstalling the System Management Console 1 Click Start -Programs -MCP-System Management Console Procedure 26 Launching the System Management ConsoleLaunching the System Management Console Figure 32 Management Console Update License Key Figure 33 Select License key File Window Copyright 2006 Nortel Networks Copyright 2006 Nortel Networks Procedure 27 Adding a server Adding a serverAdding a server At the System Management Console System Adding and configuring the Accounting Module ProceduresProcedure 28 Adding an Accounting Module component to the server 4 Select Add - Component Procedure 29 Configuring the tabs Table 1 Central Accounting Manager tab Sheet 1 ofParameter Recommended value Table 1 Central Accounting Manager tab Sheet 2 of Copyright 2006 Nortel Networks 1 Select Sites-MgmtSite-Servers-Add-General-AppSvr Adding and configuring the SIP Application ModuleProcedure 30 Adding the SIP Application Module component Procedure 31 Configuring the SIP Application Module tabs Table 2 Authentication tab Sheet 1 ofRecommended value Table 2 Authentication tab Sheet 2 of Table 3 Local Accounting Manager tab Sheet 1 of Table 5 Prov Sync Service tab defaultTable 3 Local Accounting Manager tab Sheet 2 of Table 4 Media Portal tab Table 8 In Memory Database tab Sheet 1 of Table 6 Database Base tabTable 7 SIP TCF Base tab Table 9 Location Service Manager tab Table 10 Registrar Service tabTable 8 In Memory Database tab Sheet 2 of Maximum Registration Duration Table 13 Long Call Service tab Table 11 Server Subscription tabTable 12 Subscription Processing tab maximumExpires Table 14 Server Properties tab Sheet 2 of MCS SIP ApplicationModule Basics NN10259-111 Table 15 Overload Controls tab Continued Database queue low thresholdProtocols Monitored Table 16 Transport Management tab Sheet 1 of Table 16 Transport Management tab Sheet 2 of Table 16 Transport Management tab Sheet 3 of Copyright 2006 Nortel Networks Example IPCM1 Adding and configuring the IP Client ManagerProcedure 32 Adding the IP Client Manager Small SharedMicro component Recommended Value Procedure 33 Configuring the IP Client Manager tabsTable 17 IP Client Manager tab Sheet 1 of Table 17 IP Client Manager tab Sheet 2 of Table 18 Database Base tab Table 21 Conference Service tab Table 19 UNISTIM Base tabTable 20 SIP TCF Base tab Value Table 23 Prov Sync Service tab Table 22 In Memory Database tab Copyright 2006 Nortel Networks Installing the UFTP BaseSoftware Procedure 34 Adding the UFTP softwareAdd the UFTP to the System Management Console 1 Select Sites-MgmtSite-AppSvr Copyright 2006 Nortel Networks Configuring the Provisioning Module Procedure 35 Adding the Provisioning Module Small SharedMicro1 Select Sites-MgmtSite-Servers-AppSvr 4 Select Add-Component Table 25 User Agent Server tab Procedure 36 Configuring the Provisioning Module tabsTable 24 SIP TCF Base tab Table 25 User Agent Server tab Continued Table 26 Web Client Manager tab Sheet 1 of Table 26 Web Client Manager tab Sheet 2 of Table 27 Database Base tabTable 28 SIP Personal Agent tab Maximum User Picture Size Table 30 ConferenceService tab Table 29 Provisioning Client tab Copyright 2006 Nortel Networks Example WCM1 Adding and configuring the Web Client ManagerProcedure 37 Adding the Web Client Manager Small SharedMicro Procedure 38 Configuring the Web Client Manager tabs Table 31 User Agent Server tab Table 32 SIP TCF Base tab Table 33 Web Client Manager tab Sheet 1 of Table 34 ConferenceService tab Table 33 Web Client Manager tab Sheet 2 of Table 35 Database Base tab Copyright 2006 Nortel Networks Example Oramn1 Installing and configuring the Oracle Monitor1 Select Sites-MgmtSite-Servers-MgmtSvr Procedure 40 Configuring the Oracle Monitor tabs Table 36 Oracle Server tab Table 37 IMS Main Database tab Sheet 1 of Table 37 IMS Main Database tab Sheet 2 of Table 37 IMS Main Database tab Sheet 3 of Table 37 IMS Main Database tab Sheet 4 of Table 38 Database Base tab Table 39 Oracle Listeners tab Copyright 2006 Nortel Networks Example iPIMon Installing the iPlanet MonitorProcedure 41 Adding the iPlanet Monitor Procedure 42 Configuring the iPlanet Monitor Table 40 Web Monitor tab Sheet 1 of Table 40 Web Monitor tab Sheet 2 of Table 40 Web Monitor tab Sheet 3 of Table 40 Web Monitor tab Sheet 4 of Table 40 Web Monitor tab Sheet 5 of Table 40 Web Monitor tab Sheet 6 of Table 40 Web Monitor tab Sheet 7 of Table 40 Web Monitor tab Sheet 8 of Table 40 Web Monitor tab Sheet 9 of Table 40 Web Monitor tab Sheet 10 of Table 40 Web Monitor tab Sheet 11 of Table 40 Web Monitor tab Sheet 12 of Copyright 2006 Nortel Networks Verification procedures Procedure 43 Verifying the database server1 Log into the server as nortel/new nortel user password Verifying Server1 DBSvr/MgmtSvr/AcctMgr @micromgmt/export/home/nortel= cat /etc/defaultrouter @micromgmt/export/home/nortel= cat /etc/hosts # # Internet host table# 127.0.0.1 localhost 120.120.13.22 micromgmt loghost 120.120.13.20 micromgmtdmfe0 120.120.13.21 micromgmtdmfe1 120.120.13.1 Procedure 44 Verifying the application serversVerifying Server2 application server # 127.0.0.1 localhost @microapp/export/home/nortel= cat /etc/defaultrouter@microapp/export/home/nortel= cat /etc/hosts # # Internet host table @micromgmt /export/home/nortel= tail -f /tmp/*SQL Procedure 45 Verifying the database load imssipdb deploymentVerifying the database load imssipdb deployment Copyright 2006 Nortel Networks Appendix A Deploying the PC Client Copyright 2006 Nortel Networks Appendix B Reloading IP addresses after system installation Procedure 46 Reloading IP addresses after system installation usr/local/bin/unconfigserver Select 2 and press Enter #/usr/local/bin/Interface.pl add sysmgr #/usr/local/bin/Interface.pl add acctmgr Copyright 2006 Nortel Networks NN10364-301 MCS 5100 3.5 Standard 6.0 DecemberPage 2-server Sun Fire V100 Solaris Installation and Commissioning Guide Multimedia Communication Server