Nortel Networks V100 manual Verification procedures, Verifying Server1 DBSvr/MgmtSvr/AcctMgr

Copyright © 2006 Nortel Networks

Verification procedures

Verifying Server1 (DBSvr/MgmtSvr/AcctMgr)

The following commands are executed on the database/management/accounting Sun Fire V100 server using PuTTY SSH into the machine logical IP address.

Example: Open a PuTTY SSH session to 120.120.13.22

Procedure 43 Verifying the database server

At the management pc,

1Log into the server as nortel/<new nortel user password>

2After the MCS Base Platform System Software installation, execute the following command to verify IP addressing.

@mcsmicromgmt]/export/home/nortel:=> ifconfig -a

lo0:

flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000

dmfe0:

flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEP RECATED,IPv4,NOFAILOVER> mtu 1500 index 2 inet 120.120.13.20 netmask ffffff00 broadcast 120.120.13.255

groupname imspub

dmfe0:1:

flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4 > mtu 1500 index 2 inet 120.120.13.22 netmask ffffff00 broadcast 120.120.13.255

dmfe1:

flags=69040843<UP,BROADCAST,RUNNING,MULTICAST,DE PRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE> mtu 1500 index 3 inet 120.120.13.21 netmask ffffff00 broadcast 120.120.13.255 groupname imspub

3Look for the entry that starts with ‘dmfe0.’ The parameters that follow show the IP address, subnet mask, and whether the

MCS 2-server Sun Fire V100 Solaris Installation and Commissioning Guide