Nortel Networks V100 manual Installing Disk, Procedure 15 Installing CD4, At the management pc

Copyright © 2006 Nortel Networks

Installing Disk 4

ATTENTION

The following sections describe installing CD4 according to the specific server type. Please note that there are some small, but very important, differences in the installation of the two types of servers (database/accounting/management or application server).

Database/Accounting/Management server (DBSvr, AcctMgr, MgmtSvr)

Approximate time estimate = 30 minutes

Procedure 15 Installing CD4

At the management pc,

1Place CD4 in the CD-ROM drive and press Enter to continue. Wait until you see the following statement appear:

”You are now configuring the NTP time source for this server. The servers which run the Management and Accounting service will be the source. You will need to provide the Machine Logical IP Address of each server. If running simplex mode, provide the same address twice.”

2Press Enter to continue.

3You will see the following message:

The Management server requires an external clock.

Select External Clock for time source external to the Management server.

Select Internal Clock for the Managment server

MCS 2-server Sun Fire V100 Solaris Installation and Commissioning Guide