Local Accounting Manager tab Sheet 2 of | Nortel Networks V100

Table 3 Local Accounting Manager tab (Sheet 2 of 2)

Copyright © 2006 Nortel Networks

110

Table 3 Local Accounting Manager tab (Sheet 2 of 2)

Parameter

Recommended value

Notes

Example

Disk Monitor Critical	75		default
Threshold

Enable Billing For Instant	unchecked		default
Message

3Use the values from the table that follows to complete the Media Portal tab parameters.

The shaded rows indicate values that must be addressed by the installer.

Table 4 Media Portal tab

	Recommended
Parameter	value	Notes	Example

MGCP Port	3903		default

ignoreMediaPortalInsertionRules	checked	Check this if no	default
		RTP Media Portal
		is installed

InsertPortalWhenAnyBFW

LocationBasedInsertionRules

These two are mutually exclusive.

4Use the values from the table that follows to complete the Prov Sync Service tab parameters.

Table 5 Prov Sync Service tab

	Recommended
Parameter	value	Notes	Example

Sync Time Period	10		default

5Use the values from the following table to enter into the Database Base tab parameters.

NN10364-301 MCS 5100 3.5 Standard 6.0 December 2006

Image 110

Nortel Networks V100 Local Accounting Manager tab Sheet 2 of, Media Portal tab, Prov Sync Service tab, Sync Time Period

Contents

NN10364-301 2-server Sun Fire V100 Solaris Installation and Commissioning GuideMultimedia Communication Server Page Before you start the installation Finding the latest updates on the Nortel Web siteHow to get help Setting up the baseline hardware Installing the UFTP BaseSoftware Installing Disk 6 MgmtSvr/AcctMgr onlyInstalling and launching the System Management Console Configuring the Provisioning Module Reloading IP addresses after system installation Installing the iPlanet MonitorVerification procedures Deploying the PC Client Copyright 2006 Nortel Networks Latest Finding the latest updates on the Nortel Web siteLatest Software Documentation Copyright 2006 Nortel Networks How to get help Getting help over the phone from a Nortel Solutions CenterGetting help from the Nortel web site Getting help from a specialist by using an Express Routing Code Getting help through a Nortel distributor or reseller Figure 1 2-server network with redundant Ethernet switches Overview source Figure 2 2-server network with single Ethernet switchProtected power Restrictions and limitations Media Application Server Announcements Service Guide, NN10379-113 MCS 5100 Ad Hoc Audio Conferencing Service Guide, NN10297-111Media Application Server - Music on Hold Service Guide, NN10378-113 Media Application Server IM Chat Service Guide, NN10380-113 MCS 5100 Fault Management Alarm and Log reference, NN10385-900 MCS 5100 Performance Management OM reference , NN10386-700 Copyright 2006 Nortel Networks Before you start the installation Prerequisites Acronyms Text conventions used in this document Key stroke symbolsWhen you are asked to Configuration Server configurationTable 1 2-server configuration Loading disks MCS Base Platform System to installTable 2 Mapping of Kit NTVW01BD disks to servers with times Approximatetime Copyright 2006 Nortel Networks Minimum and recommended requirements for customer-provided PC mouse required Video Graphics Card Figure 3 Hardware connections overview Setting up the baseline hardwareBaseline hardware Hardware required for the 2-server system consists of the following At the rack Setting up rack to mount hardwareProcedure 1 Setting up rack to mount hardware Figure 4 MCS 5100 19-inch rack Connecting the Sun Fire V100 server to the layer-2 switchProcedure 2 Connecting the V100 server to the layer-2 switch At the back of the Sun Fire V100 server Connecting the Sun Fire V100 server to the MRV LX terminal server Figure 6 Sun Fire V100 server cabling to layer-2 switch Figure 7 Sun Fire V100 server network callouts Following configuration, remove the cable Figure 8 P1 and P2 custom cable connections to terminal serverNote This cable is only connected to configure the terminal server See note Copyright 2006 Nortel Networks At the terminal server Installing and accessing the MRV LX-4000 series terminal serverProcedure 5 Accessing the MRV LX terminal server At the browser address field 2 Make sure you have the Java Plug-in installed Figure 9 MRV Configuration Console windowFigure 10 Java Security Warning pop-up window Figure 11 LX Series Configuration Console page 7 If you log in as a user, the following window appears Figure 12 Login window6 Enter your Username and Password, and click Login Figure 13 User login window Figure 14 Example selecting Ports Async Figure 15 Port 19 dialog box InReach Procedure 7 Changing the password defaultsAt the management pc Procedure 8 Accessing the MRV LX terminal server Name the HyperTerminal Session termserv Enter Procedure 9 Connecting a server to the MRV LX terminal server 8 Define server ip address IP address of the terminal server 4 For port, enter the port number which corresponds to A/LOM Serial A on the V100 and the MRV LX terminal server Copyright 2006 Nortel Networks Procedure 11 Power on to get the ok prompt Powering on the serversProcedure 10 Powering on the servers At the server 4 The ok prompt appears Procedure 12 Installing CD1 Installing Disks 1 toInstalling CD1 Solaris Installation Program Page Powering on the servers on pageWhat type of terminal are you using? Select a Language Primary Network Interface /Primary Network Interface Network Connectivity/NetworkedDHCP/Use DHCP Host name/Host name Name Service/Name Service IPv6/Enables IPv6Configure Security Policy Netmask/Netmask identification is completed 1 2-server Micro Configuration 2 4 or 4+ Standard ConfigurationContinuing the process Installing CD2 Installing CD3 Procedure 13 Installing CD2 Procedure 14 Installing CD3 Database/Accounting/Management server DBSvr, AcctMgr, MgmtSvr Installing DiskProcedure 15 Installing CD4 Refer to the CSI for NTP time source IP information ”You are now configuring IPMP Multipathing Physical IP address of the dmfe1 interface Enter Enter ping target #1 Enter ping target #2 Enter ping target #3 Obtaining IP Addresses for SysMgr/AcctMgr Failover Operation Procedure 16 Installing CD4 Enter ping target #1 120.120.13.22Enter Physical IP address of the dmfe1 interfaceExample Enter ping target #2 120.120.13.1Enter Figure 17 Application server IPMP configuration summary Installing Disk 5 all servers Procedure 17 Installing CD5 Copyright 2006 Nortel Networks etc/init.d/volmgt start Procedure 18 Enabling or disabling the CD-ROM auto-mountEnabling or disabling the automatic mount Copyright 2006 Nortel Networks Installing Disk 6 MgmtSvr/AcctMgr only Procedure 19 Installing CD Copyright 2006 Nortel Networks Procedure 20 Installing Oracle 9.2.0.4 on the database server DBSvr Installing Oracle 9.2.0.4 on the database serverInstalling Oracle 4 cd space /cdrom/cdrom0 Enter cp space InstallCDtoDisk space / Enter 6 cd space / Enter 7 ./InstallCDtoDisk Enter Enter PromptDefinition cd space /IMS/oracds/Disk1 Enter grepspace-Ispaceerrorspaceoracleinstall.log Deploying the MCS database load imssipdb Procedure 21 Deploying the initial database load imssipdbDeploying the initial database load Select the Type of Deployment 1 Initial Deployment Deploying and starting the Sysmgr Procedure 22 Deploying and starting the SysmgrDeploying and starting the Sysmgr Example @micromgmt/export/home/nortel= mgmtdeploy.pl @micromgmt /export/home/nortel= meinit -p Procedure 23 Verifying the Sysmgr deploymentSysmgr deployment verification Rel3 Copyright 2006 Nortel Networks Procedure 24 Registering the license key Registering your license key Figure 18 KRS login screen Figure 19 Keycode Retrieval System, Creating your site Figure 20 Keycode Retrieval System, Entering your site information Figure 21 Keycode Retrieval System, Current Summary 10 Enter the MAC addresses of the CORE servers and click on Add Figure 22 Keycode Retrieval System, Adding MAC address Figure 23 Keycode Retrieval System, Adding a Media Application Server Figure 24 Keycode Retrieval System, Current Summary Figure 25 Keycode Retrieval System, Gen KC with Auth Code Figure 26 Keycode Retrieval System, Finding the keycode Figure 27 Keycode Retrieval System, Adding a MAC address Figure 28 Keycode Retrieval System, Entering the authcode Figure 29 Keycode Retrieval System, Summary of features Best Customer Figure 30 Keycode Retrieval System, Retrieving the keycode Figure 31 Keycode Retrieval System, Retrieving your keycode, part 24 Download the new license key file to the MgmtSvr hard drive Copyright 2006 Nortel Networks Procedure 25 Installing the System Management Console Installing and launching the System Management ConsoleInstalling the System Management Console 1 Click Start -Programs -MCP-System Management Console Procedure 26 Launching the System Management ConsoleLaunching the System Management Console Figure 32 Management Console Update License Key Figure 33 Select License key File Window Copyright 2006 Nortel Networks Copyright 2006 Nortel Networks Adding a server Procedure 27 Adding a serverAdding a server At the System Management Console Customer defines Procedure 28 Adding an Accounting Module component to the server Adding and configuring the Accounting ModuleProcedures 4 Select Add - Component Parameter Procedure 29 Configuring the tabsTable 1 Central Accounting Manager tab Sheet 1 of Recommended value Table 1 Central Accounting Manager tab Sheet 2 of Copyright 2006 Nortel Networks 1 Select Sites-MgmtSite-Servers-Add-General-AppSvr Adding and configuring the SIP Application ModuleProcedure 30 Adding the SIP Application Module component Recommended Procedure 31 Configuring the SIP Application Module tabsTable 2 Authentication tab Sheet 1 of value Table 2 Authentication tab Sheet 2 of Table 3 Local Accounting Manager tab Sheet 1 of Table 3 Local Accounting Manager tab Sheet 2 of Table 5 Prov Sync Service tabdefault Table 4 Media Portal tab Table 8 In Memory Database tab Sheet 1 of Table 6 Database Base tabTable 7 SIP TCF Base tab Table 8 In Memory Database tab Sheet 2 of Table 9 Location Service Manager tabTable 10 Registrar Service tab Maximum Registration Duration Table 12 Subscription Processing tab Table 13 Long Call Service tabTable 11 Server Subscription tab maximumExpires Module Basics Table 14 Server Properties tab Sheet 2 ofMCS SIP Application NN10259-111 Protocols Monitored Table 15 Overload Controls tab ContinuedDatabase queue low threshold Table 16 Transport Management tab Sheet 1 of Table 16 Transport Management tab Sheet 2 of Table 16 Transport Management tab Sheet 3 of Copyright 2006 Nortel Networks Example IPCM1 Adding and configuring the IP Client ManagerProcedure 32 Adding the IP Client Manager Small SharedMicro component Recommended Value Procedure 33 Configuring the IP Client Manager tabsTable 17 IP Client Manager tab Sheet 1 of Table 17 IP Client Manager tab Sheet 2 of Table 18 Database Base tab Table 20 SIP TCF Base tab Table 21 Conference Service tabTable 19 UNISTIM Base tab Value Table 23 Prov Sync Service tab Table 22 In Memory Database tab Copyright 2006 Nortel Networks Add the UFTP to the System Management Console Installing the UFTP BaseSoftwareProcedure 34 Adding the UFTP software 1 Select Sites-MgmtSite-AppSvr Copyright 2006 Nortel Networks 1 Select Sites-MgmtSite-Servers-AppSvr Configuring the Provisioning ModuleProcedure 35 Adding the Provisioning Module Small SharedMicro 4 Select Add-Component Table 25 User Agent Server tab Procedure 36 Configuring the Provisioning Module tabsTable 24 SIP TCF Base tab Table 25 User Agent Server tab Continued Table 26 Web Client Manager tab Sheet 1 of Table 28 SIP Personal Agent tab Table 26 Web Client Manager tab Sheet 2 ofTable 27 Database Base tab Maximum User Picture Size Table 30 ConferenceService tab Table 29 Provisioning Client tab Copyright 2006 Nortel Networks Example WCM1 Adding and configuring the Web Client ManagerProcedure 37 Adding the Web Client Manager Small SharedMicro Procedure 38 Configuring the Web Client Manager tabs Table 31 User Agent Server tab Table 32 SIP TCF Base tab Table 33 Web Client Manager tab Sheet 1 of Table 34 ConferenceService tab Table 33 Web Client Manager tab Sheet 2 of Table 35 Database Base tab Copyright 2006 Nortel Networks Example Oramn1 Installing and configuring the Oracle Monitor1 Select Sites-MgmtSite-Servers-MgmtSvr Procedure 40 Configuring the Oracle Monitor tabs Table 36 Oracle Server tab Table 37 IMS Main Database tab Sheet 1 of Table 37 IMS Main Database tab Sheet 2 of Table 37 IMS Main Database tab Sheet 3 of Table 37 IMS Main Database tab Sheet 4 of Table 38 Database Base tab Table 39 Oracle Listeners tab Copyright 2006 Nortel Networks Example iPIMon Installing the iPlanet MonitorProcedure 41 Adding the iPlanet Monitor Procedure 42 Configuring the iPlanet Monitor Table 40 Web Monitor tab Sheet 1 of Table 40 Web Monitor tab Sheet 2 of Table 40 Web Monitor tab Sheet 3 of Table 40 Web Monitor tab Sheet 4 of Table 40 Web Monitor tab Sheet 5 of Table 40 Web Monitor tab Sheet 6 of Table 40 Web Monitor tab Sheet 7 of Table 40 Web Monitor tab Sheet 8 of Table 40 Web Monitor tab Sheet 9 of Table 40 Web Monitor tab Sheet 10 of Table 40 Web Monitor tab Sheet 11 of Table 40 Web Monitor tab Sheet 12 of Copyright 2006 Nortel Networks 1 Log into the server as nortel/new nortel user password Verification proceduresProcedure 43 Verifying the database server Verifying Server1 DBSvr/MgmtSvr/AcctMgr # 127.0.0.1 localhost 120.120.13.22 micromgmt loghost @micromgmt/export/home/nortel= cat /etc/defaultrouter@micromgmt/export/home/nortel= cat /etc/hosts # # Internet host table 120.120.13.20 micromgmtdmfe0 120.120.13.21 micromgmtdmfe1 120.120.13.1 Procedure 44 Verifying the application serversVerifying Server2 application server # 127.0.0.1 localhost @microapp/export/home/nortel= cat /etc/defaultrouter@microapp/export/home/nortel= cat /etc/hosts # # Internet host table @micromgmt /export/home/nortel= tail -f /tmp/*SQL Procedure 45 Verifying the database load imssipdb deploymentVerifying the database load imssipdb deployment Copyright 2006 Nortel Networks Appendix A Deploying the PC Client Copyright 2006 Nortel Networks Appendix B Reloading IP addresses after system installation Procedure 46 Reloading IP addresses after system installation usr/local/bin/unconfigserver Select 2 and press Enter #/usr/local/bin/Interface.pl add sysmgr #/usr/local/bin/Interface.pl add acctmgr Copyright 2006 Nortel Networks NN10364-301 MCS 5100 3.5 Standard 6.0 DecemberPage 2-server Sun Fire V100 Solaris Installation and Commissioning Guide Multimedia Communication Server