EVGA 730I manual Installing the CPU Fan, Installing System Memory DIMMs, ‰ One Dimm, ‰ Two DIMMs

Note: Make sure the CPU is fully seated and level in the socket.

7.Close the load plate over the CPU and press down while you close and engage the socket lever.

Installing the CPU Fan

There are many different fan types that can be used with this motherboard. Follow the instruction that came with you fan assembly. Be sure that the fan orientation is correct for your chassis type and your fan assembly.

Installing System Memory (DIMMs)

Your new motherboard has four 240-pin slots for DDR2-800 memory. These slots support 256 MB, 512 MB,1 GB, and 2Gb DDR2. There must be at least one memory bank populated to ensure normal operation. Use the following the recommendations for installing memory. (See Figure 1 on page 6 for the location of the memory slots.)

‰One DIMM:

Install into slot 1. You can install the DIMM into any slot, however, slot 1 is preferred.

‰Two DIMMs:

Install into either slots 1 and 3 or 2 and 4. The four DIMM sockets are divided into two colors to help you identify the channel pairs. To obtain best performance, simply mount DIMM sockets of the same color.

‰Four DIMMs:

Install into slots 1, 2, 3, and 4.

EVGA 10