Excalibur electronic AL-1000ATV2, AL-900ATV2 owner manual Table Of Contents, Introduction

"WE'VE GOT THE EDGE ON SECURITY"

OWNER'S MANUAL

AL-1000ATV2

AL-900ATV2

One or more of these patents may apply to this product:

#5,612,578 #5,612,699 #5,654,688 #5,663,704 #382,558 #385,878 #5,719,551 #5,729,191 #5,739,748 #5,750,942 #5,818,329 #5,739,747

COPYRIGHT:OMEGARESEARCH&DEVELOPMENTINC.1999

Table Of Contents
Introduction		3-4
Advanced System Features		4-5
Transmitter Operations		6
Arming the System Using the Transmitter		7-8
Passively Arming the System		8-9
Security System Armed and Triggered		9-11
Disarming the System		11-12
Remote Panic Feature		13
Optional 2nd Channel Output (Trunk Release) and 3rd Channel Output ....		13-14
Using the Valet Switch		14-16
Red LED Status Indicator		16-18
Audible and Visual Indications		18-19
Auxiliary Optional Sensor Ports with Prewarn		22-23
Anti-Carjacking Protection		23-24
Optional Pager Unit and Backup Battery		24
Programming Transmitters		25-26
Programming Features		27-28
Features Programming Checklist	Centerfold
Programmable Features		29-38
Transmitter Options		39

Introduction

Congratulations on your purchase of your new vehicle security system and on joining over 8 million people worldwide who have trusted their vehicle's security to the designers of Omega Research & Development, Inc. To learn how to operate your security system, please become familiar with the following three principal user components: the Remote Transmitter, the Red LED Status Indicator and the Valet Switch.

The Remote Transmitter: Each security system includes two pre-learned transmitters, but if desired up to 4 different transmitters can operate the system. The transmitter has three buttons: one large button in the middle and two smaller buttons, one on either side. This system is pre-programmed to have the transmitter buttons work in the following configuration:

The large button is used to arm, disarm and panic the security system.

The small right button is used to operate the 2nd channel output, typically used for trunk release, and arm and disarm the system without the audible chirps.

The small left button operates the 3rd channel output and, in conjunction with the large button, can remotely bypass a sensor upon arming.

The Red LED Status Indicator: Informs you of the different conditions the security system can be in and also serves as a visual deterrent to break-ins and theft.

The Valet Switch: This switch is used for several purposes, one which is being used to place the system into "Valet Mode". Valet Mode can be used to turn off automatic functions, such as Last Door Arming or Automatic Rearming. The Valet Switch is also used, with the ignition key, to disarm the security system in the event the transmitter becomes inoperable, and this switch is also used in the procedure for programming features and learning transmitters.

Please spend time reviewing this guide to become familiar with your new Omega vehicle security system. You will find that your new vehicle security system will give you years of trouble-free convenience and protection.

Advanced System Features

Automatic Transmitter VerificationTM (ATV): Your Omega vehicle security system is protected against a common weakness found in all remote controlled security systems, and even factory-equipped Remote Keyless Entry systems. This weakness is the ease in which an additional transmitter may be programmed to operate the system. This vulnerability allows a thief to code his own, unauthorized

Page - 3 Page - 4