Feature #6: Doors Lock At Ignition "On" | (Factory Setting ON) |
Feature Turned On: The security system will automatically lock the vehicle's doors one second after the ignition switch is turned "on". This feature adds considerable personal security to you and your family.
Feature #7: Unlock Output #1 At Ignition "Off" | (Factory Setting ON) |
Feature #8: Unlock Output #2 At Ignition "Off" | (Factory Setting OFF) |
These Features will cause the security system to automatically unlock either the driver's door or all of the vehicle's doors instantly when the ignition switch is turned "off". Please note that the exact operating parameters of these Features depends upon the configuration of the security system and your vehicle's power doorlocks.
This system may be configured to unlock only the driver's door upon disarming. Then if desired, pressing the large transmitter button again within 5 seconds will unlock all of the doors. These Features can operate one of two ways: first, if all of the doors unlock upon disarming, these Features will unlock all of the doors when the ignition is turned "off". Second, if your vehicle is configured to unlock the driver's door only upon disarming, these Features can be configured to unlock only the driver's door upon the ignition being turned "off". Please consult with the installer as to the feasibility of adding the driver's door only unlock configuration to your vehicle, as power doorlocking systems differ in compatibility to this feature.
Page - 32
Feature Turned Off: When the transmitter has disarmed the security system, the system will stay disarmed until the transmitter is used to arm it again.
Feature #12: 2nd Channel Output Disarms System (Factory Setting ON)
Feature Turned On: When the 2nd channel output is utilized, the security system will also disarm at the same time, chirping the siren twice, unlocking the doors and turning the exterior lights on for thirty or five seconds. The 2nd channel output, and this feature, can be used for remote trunk release operation.
Feature #13: .8 / 3 Second Doorlock Pulse(Factory Setting .8 (ON)
Feature Turned On: The doorlock outputs have a .8 second negative pulse to an optional doorlock interface to operate the vehicle's power doorlocking system. Feature Turned Off: The doorlock outputs have a 3 second negative pulse to an optional doorlock interface to operate the vehicle's vacuum doorlocking system.
Feature #14: Double Unlock Pulse(Factory Setting OFF)
Some newer vehicles require a doorlock interface which provides a double doorlock output pulse to unlock all of the vehicle's doors. Feature #12 must be .8 second doorlock pulse time (Feature #12 turned ON) for Feature #14 to operate.
Feature Turned On: The unlock output provides two pulses.
Feature Turned Off: The unlock output provides a single pulse.
Feature #9: Open Door Bypass To Features #6, #7, #8 (Factory Setting ON)
Feature Turned On: When the security system locks and unlocks the doors from Features #6, #7 and #8, if a door is open the doors will not automatically lock when the ignition switch turns "on", or automatically unlock when the ignition switch is turned "off".
Feature #10: Lights On 5 / 30 Seconds Upon Disarm (Factory Setting 30 Seconds)
Feature Turned On: Upon disarming, the exterior and interior lights will stay on for 30 seconds, to illuminate the way to your vehicle.
Feature Turned Off: The exterior and interior lights will stay on for 5 seconds when the system is disarmed.
Feature #11: Automatic Rearming | (Factory Setting ON) |
Feature Turned On: When the transmitter has disarmed the security system, the system will rearm and relock the doors 90 seconds later, unless a door is opened or the ignition is turned on. This feature prevents the system from being accidentally disarmed if a transmitter button is unknowingly pressed by an object while in a pocket or purse, or from children playing with the transmitter.
Page - 33 |
|
Feature #15: 3 / 45 Second Arming Delay | (Factory Setting 3 Seconds (ON) |
Feature Turned On: The security system will be become fully armed 3 seconds after the arming siren chirp confirmation.
Feature Turned Off: The security system will be become fully armed 45 seconds after the arming siren chirp confirmation.
Note: During the arming delay if any protected circuit should go into a triggered state, the system will arm, but that circuit will be unprotected until it reverts back to an
Feature #16: Confirmation Chirp(Factory Setting ON)
Feature Turned On: The security system will chirp the siren for confirmation that the system armed and disarmed.
Feature Turned "Off": The security system will not have siren chirps for the arming and disarming confirmation. Turning this feature off will also eliminate the three chirps upon arming if the instant trigger circuit is grounded, and the four chirps upon disarming if the system was triggered and reset. However, the Prewarn Feature and the Programmable Features chirps will still operate.
Regardless of this Feature, eliminating the siren chirp may be done on a onetime temporary basis as desired by pressing the small left transmitter button twice for arming or disarming. Even if this Feature is used to remove the confirmation chirps, the audible Automatic Transmitter VerificationTM feature will still operate.
Page - 34 | Page - 35 |
