Exmark 4500-438 rev. a manual Troubleshooting, Problem Possible Cause Corrective Action

Troubleshooting

Troubleshooting

Important: It is essential that all operator safety mechanisms be connected and in proper operating condition prior to mower use.

When a problem occurs, do not overlook the simple causes. For example: starting problems could be caused by an empty fuel tank.

The following table lists some of the common causes of trouble. Do Not attempt to service or replace major items or any items that call for special timing or adjustment procedures (such as valves, governor, etc.). Have this work done by your Engine Service Dealer.

Note: When disconnecting electrical connectors Do Not pull on the wires to separate the connectors.

Problem		Possible Cause		Corrective Action
Excessive grass blowout from the deck.	1.	Bags are full.	1.	Dump more frequently.
	2.	Plugged screen in bagger hood.	2.	Remove debris, leaves or grass clippings
				from the screen.
	3.	Ground speed is too fast.	3.	Drive slower at full throttle.
	4.	Plugged tube.	4.	Locate and remove plugged debris.
	5.	Conditions are dry.	5.	Use lower lift blade or reduce engine
				speed.
Tubes plug too frequently.	1.	Bags are too full.	1.	Dump more frequently
	2.	Ground speed is too fast.	2.	Drive slower at full throttle.
	3.	Grass is too wet.	3.	Cut grass when it is dry.
	4.	Grass is too long.	4.	Cut grass more frequently or at higher cut
				height.
	5.	Plugged screen in bagger hood.	5.	Remove debris, leaves, or grass clippings
				from the screen.
	6.	Plugged tube.	6.	Use recommended high lift blades.

19