Operation
3.To move forward in a straight line apply equal forward pressure to both levers.
To turn left or right, pull the motion control lever back toward neutral in the direction desired.
The machine will move faster the farther the motion control levers are moved away from neutral.
4.To stop, pull the motion control levers back to the neutral position.
Transporting
Transporting a Unit
Important: Do Not transport FrontRunner tractor without an approved Exmark front mount attachment.
Use a
| Figure 7 |
| |
1. | Handles Out (Neutral | 4. | Forward |
| Lock) | 5. | Reverse |
2. | Handles In (Neutral) | ||
3.Front of Unit
Driving in Reverse
1.Move the motion control levers inward to the center to the neutral unlocked position.
2.To move rearward in a straight line applying equal pressure pull both motion control levers rearward.
To turn left or right, release pressure on the motion control lever toward the direction desired.
3.To stop, push the motion control levers to the neutral position.
CAUTION
This unit does not have proper turn signals, lights, reflective markings, or a slow moving vehicle emblem. Driving on a street or roadway without such equipment is dangerous and can lead to accidents causing personal injury. Driving on a street or roadway without such equipment may also be a violation of State laws and the operator may be subject to traffic tickets and/or fines.
Do Not drive a unit on a public street or roadway.
WARNING
Loading a unit on a trailer or truck increases the possibility of
•Use extreme caution when operating a unit on a ramp.
•Use only a single, full width ramp; Do Not use individual ramps for each side of the unit.
•If individual ramps must be used, use enough ramps to create an unbroken ramp surface wider than the unit.
•Do Not exceed a 15° angle between ramp and ground or between ramp and trailer or truck.
•Avoid sudden acceleration while driving unit on a ramp.
22
