Operation
Driving the Machine
CAUTION
Machine can spin very rapidly by positioning one lever too much ahead of the other. Operator may lose control of the machine, which may cause damage to the machine or injury.
•Use caution when making turns.
•Slow the machine down before making sharp turns.
Important: To begin movement (forward or backward) the operator must be in the seat, the brake lever must be disengaged (pushed down) before the motion control levers can be moved in or the engine will stop.
When levers are centered in the
3.To move forward in a straight line apply equal forward pressure to both levers.
To turn left or right, pull the motion control lever back toward neutral in the direction desired.
The machine will move faster the farther the motion control levers are moved away from neutral.
4.To stop, pull the motion control levers back to the neutral position.
| Figure 6 |
| |
1. | Handles Out (Neutral | 5. | Neutral |
| Lock) | 6. | Reverse |
2. | Handles In (Neutral) | ||
3. | Front of Unit | 7. | Neutral Lock |
4.Forward
Driving Forward
1.Release the parking brake.
2.Move the motion control levers inward to the center to the neutral unlocked position.
| Figure 7 |
| |
1. | Handles Out (Neutral | 4. | Forward |
| Lock) | 5. | Reverse |
2. | Handles In (Neutral) | ||
3. | Front of Unit |
|
|
|
|
|
|
Driving in Reverse
1.Move the motion control levers inward to the center to the neutral unlocked position.
2.To move rearward in a straight line applying equal pressure pull both motion control levers rearward.
To turn left or right, release pressure on the motion control lever toward the direction desired.
3.To stop, push the motion control levers to the neutral position.
21
