Specifications

Specifications

Model Numbers

Serial Nos: 820,977 and Higher

PHZ19KA343; PHZ19KA343CA

Systems

Engine

Engine Specifications: See your Engine Owner’s Manual

RPM: Full Speed: 3750 ±100 RPM (No Load)

Idle: 1400 RPM

Fuel System

Capacity: 7.7 gal. (29.1 L)

Type of Fuel: Regular unleaded gasoline, 87 octane or higher; containing no more than 10% methanol or ethanol.

Fuel Filter: In-line Kawasaki P/N 49019–7001

Fuel Shut-Off Valve: 1/4 turn increments (“ON”, “OFF”)

Electrical System

Charging System: Flywheel Alternator

Charging Capacity: 13 amps

Battery Type: BCI Group U1

Battery Voltage: 12 Volt

Polarity: Negative Ground

Fuses:

30 amp main fuse

25 amp charging system fuse

10 amp clutch fuse

Safety Interlock System

LCD indicators appear for the PTO, park brake, drive levers, and operator presence in the message display on the center console.

PTO must be disengaged, brake engaged, and motion control levers out (neutral lock) to start engine. (It is not necessary for the operator to be in the seat to start the engine.)

Operator must be in seat when PTO is engaged, brake is disengaged, or motion control levers are moved in or engine will stop.

Engine will stop if either the left, the right, or both levers are moved from neutral lock position while brake is engaged.

Operator Controls

Steering and Motion Control:

Note: Motion control levers are adjustable to two heights.

Separate levers, on each side of the console, control speed and direction of travel of the respective drive wheels.

Steering is controlled by varying the position of the levers relative to each other.

Moving motion control levers outward (in slots) locks the drive system in neutral.

PTO Engagement Switch: Engages electric clutch (to drive belt) which engages mower blades.

Parking Brake Lever: Engages parking brake.

Deck Height Adjustment Lever: Sets cutting height to desired position.

Deck Lift Assist Lever: Foot pedal that assists in raising the deck.

Seat

Type: Standard seat with high back, foam padded, (internal suspension) and armrests.

Mounting: Hinged to tilt up for access to battery and other components. Held in tilted position with lanyard. Adjustable fore and aft seat track.

Armrests: Standard–foam padded flip-up armrests.

Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay seat switch eliminates rough ground cut-outs.

13

Page 13
Image 13
Exmark 820, 977 manual Specifications, Model Numbers, Systems

977, 820 specifications

The Exmark 820,977 is a powerful and versatile commercial-grade mower that stands out in the landscaping and turf management industry. Renowned for its durability and efficiency, this model is designed to meet the demands of professionals and serious enthusiasts alike.

One of the main features of the Exmark 820,977 is its efficient engine. Powered by a robust V-Twin engine, this mower delivers impressive horsepower, enabling it to cut through thick grass and tough terrain with ease. The engine is designed for optimal fuel efficiency, reducing operational costs while maximizing performance.

The Exmark 820,977 utilizes a patented UltraCut deck technology that ensures a clean and precise cut. This innovative mowing deck design contributes to an exceptional quality of cut at various mowing heights. The fully welded construction enhances durability, allowing for prolonged use in demanding conditions.

Another significant characteristic of the Exmark 820,977 is its ergonomic design. The control system is user-friendly, providing operators with intuitive controls that minimize fatigue during extended use. The adjustable operator seat contributes to comfort, allowing for optimal positioning regardless of the user's stature.

For enhanced maneuverability, the Exmark 820,977 features a low center of gravity and responsive handling, making it easier to navigate around obstacles and tight spaces. The mower's compact design also facilitates storage and transport without taking up too much space.

Technology plays a crucial role in the Exmark 820,977's performance. The model incorporates a range of advanced features, such as an advanced ignition system, which ensures reliable starts and smooth operation. Additionally, the mower includes a maintenance display that alerts users when service is needed, promoting proactive care and reducing downtime.

The Exmark 820,977 is also designed with adaptability in mind. Optional attachments and accessories allow users to customize their mower for a variety of tasks, from mulching and bagging to aerating and dethatching. This versatility makes it an ideal choice for commercial landscapers who require equipment that can handle different jobs effectively.

In conclusion, the Exmark 820,977 epitomizes a blend of powerful performance, advanced technology, and user-friendly features. Its durability and adaptability make it a top choice for professionals seeking a reliable mower capable of delivering superior results in challenging environments.