Exmark E-Series manual Product Overview Operation, Controls, Motion Control Levers, Choke Control

Operation

Product Overview Operation

Figure 4

1.	Rollover Protection	5.	Motion control levers
	System (ROPS)	6.	Parking brake
2.	Engine controls (right
	console)
3.	Seat belt	7.	Height of cut adjustment

4.Fuel cap

Note: Determine the left and right sides of the machine from the normal operating position.

Controls

Motion Control Levers

The motion control levers located on each side of the console control the forward and reverse motion of the machine.

Moving the levers forward or backward turns the wheel on the same side forward or reverse respectively. Wheel speed is proportional to the amount the lever is moved.

Moving the levers outward from the center position into the T-slot locks them in the neutral position (Figure 5).

Figure 5

1.	Neutral lock position	4.	Forward
	(handles out)
2.	Neutral operate position	5.	Neutral (operate)
	(handles in)	6.	Reverse
3.	Front of unit

Choke Control

Located on right console (black lever) (see Figure 6).

The choke is used to aid in starting a cold engine. Moving the choke lever forward will put the choke in the “ON” position and moving the choke lever to the

18