2.SPECIFICATIONS
2.1MODEL NUMBER: FR25KD
2.2ENGINE
2.2.1Engine Specifications: See your Engine Owner’s Manual
2.2.2RPM: Full Speed: 3870 RPM (No Load)
2.3FUEL SYSTEM
2.3.1Capacity: 8.5 gal (32 L)
2.3.2Type of Fuel: Diesel fuel, 40 cetane or higher.
2.3.3Fuel Filter: 2
2.4ELECTRICAL SYSTEM
2.4.1Charging System: External Alternator
2.4.2Charging Capacity: 60 amps
2.4.3Battery Type: BCI Group 26
2.4.4Battery Voltage: 12 Volt
2.4.5Polarity: Negative Ground
2.4.6Safety Interlock System:
PTO must be disengaged, brake engaged, and speed control lever in neutral position to start engine. (It is not necessary for the operator to be in the seat to start the engine.)
Operator must be in seat when PTO is engaged, brake is disengaged, or speed control lever is moved out of neutral or engine will stop.
Engine will stop if the motion control levers are moved from neutral position while brake is engaged.
2.5COOLING SYSTEM
2.5.1Fan: Belt driven with continuous operation with engine running.
2.5.2Coolant Liquid: 50/50 mix of DexCool© extended life antifreeze and water.
2.5.3Coolant Capacity: 4 quarts
2.6OPERATOR CONTROLS
2.6.1Steering and Motion Control:
Separate levers, on each side of the console, control speed and direction of travel of the respective drive wheels.
Steering is controlled by varying the position of the levers relative to each other. Moving motion control levers outward (in slots) locks the drive system in neutral. NOTE: Motion control levers are adjustable to three (3) heights.
2.6.2PTO Engagement Switch: Engages drive to PTO (mower deck).
2.6.3Parking Brake Lever: Pull back to engage parking brake.
2.7SEAT
2.7.1Type: Standard seat with high back, foam padded (internal suspension).
2.7.2Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. The seat is held in the tilted position with a linkage. Adjustable fore and aft seat track.
12
