Troubleshooting
Problem |
| Possible Cause |
| Corrective Action |
|
|
|
|
|
Warning buzzer emits continuous beep. (See | 1. | Temperature is increasing on coolant | 1. | Turn unit off and allow engine and engine |
also Engine overheats). |
| temperature gauge. |
| components to cool. |
| 2. | Coolant level is low. | 2. | Add coolant. |
| 3. | Debris on or around radiator. | 3. | Remove debris. |
| 4. | Water pump or alternator belt is worn, | 4. | Contact Authorized Service Dealer. |
|
| loose or broken. |
|
|
|
|
|
|
|
Warning buzzer emits intermittent beep. | 1. | Oil level is low. | 1. | Check oil level. |
| 2. | Oil leaking from engine. | 2. | Contact Authorized Service Dealer. |
|
|
|
|
|
Clutch will not engage. | 1. | Fuse is blown. | 1. | Replace fuse. Check coil resistance, |
|
|
|
| battery charge, charging system, and |
|
|
|
| wiring connections and replace if |
|
|
|
| necessary. |
| 2. | Low voltage supply at the clutch. | 2. | Check coil resistance, battery charge, |
|
|
|
| charging system, and wiring connections |
|
|
|
| and replace if necessary. |
| 3. | Damaged coil. | 3. | Replace clutch. |
| 4. | Inadequate current supply. | 4. | Repair or replace clutch lead wire or |
|
|
|
| electrical system. Clean connector |
|
|
|
| contacts. |
| 5. | Rotor/armature airgap is too large. | 5. | Remove shim or replace clutch. |
| 6. | Engine has overheated. | 6. | Determine cause of overheat (see Engine |
|
|
|
| overheats). |
|
|
|
|
|
52
